Location:
Search - 2138
Search list
Description: 3位LED计时代码，段显示数据由2138的IO口输出，为片选信号由P0口的8，10，11输出。-time code of data from 2138 show that the IO output, elections for the film signals from the 8, 10, 11 P0 mouth output.
Platform: |
Size: 2682 |
Author: zz |
Hits:
Description: SPI总线驱动，可驱动FLASH和数码管等设备。
LPC基于2138芯片的中间件-SPI Bus Driver, Flash drives and digital control, and other equipment. LPC based on the 2138 chip Middleware
Platform: |
Size: 50217 |
Author: 高明 |
Hits:
Description: 基于 Philips 公司的 ARM-7 使用之 uC/OS-II 作业系统,此例程是移植于 LPC-2138 上的应用,不同于一般的 Porting 其最主要是加入了支援 OS_View 观察器功能,于 IAR EWARM V4.41A 工程编译,而 uC/OS 版本为 2.83
Platform: |
Size: 3225443 |
Author: kly |
Hits:
Description: 1、arm7芯片2138驱动大液晶
2、ym320240的液晶驱动
3、动态等待图标的显示
4、各种字符的显示。
Platform: |
Size: 121288 |
Author: 王一 |
Hits:
Description: lpc2138/48的spi中断接收程序
Platform: |
Size: 58786 |
Author: yhzzyahoo |
Hits:
Description: ARM7 LPC213X系列启动源代码,只要在自己的项目中添加上启动源代码,然后编译执行.-ARM7 LPC213X Series start source code, as long as their projects initiated added the source code, then compile implementation.
Platform: |
Size: 21504 |
Author: 温生 |
Hits:
Description: LPC2138 I2C读铁电驱动
ARM7和UCOS的中间件-LPC2138 I2C Reading Ferroelectric Driver ARM7 and UCOS Middleware
Platform: |
Size: 128000 |
Author: 高明 |
Hits:
Description: SPI总线驱动，可驱动FLASH和数码管等设备。
LPC基于2138芯片的中间件-SPI Bus Driver, Flash drives and digital control, and other equipment. LPC based on the 2138 chip Middleware
Platform: |
Size: 50176 |
Author: 高明 |
Hits:
Description: AMR7 小型文件系统驱动。
LPC2138基于ucos的中间件，可进行基于FAT32的基本文件操作.
-AMR7 small file system driver. Based on the LPC2138 OUT middleware can be conducted based on the basic FAT32 file manipulation.
Platform: |
Size: 97280 |
Author: 高明 |
Hits:
Description: LPC213X芯片使用说明，非常详细，周立功提供。-LPC213X chips for use, very thorough, who for weeks.
Platform: |
Size: 1933312 |
Author: daxia7203 |
Hits:
Description: 基于 Philips 公司的 ARM-7 使用之 uC/OS-II 作业系统,此例程是移植于 LPC-2138 上的应用,不同于一般的 Porting 其最主要是加入了支援 OS_View 观察器功能,于 IAR EWARM V4.41A 工程编译,而 uC/OS 版本为 2.83-Based on the Philips company
Platform: |
Size: 3225600 |
Author: kly |
Hits:
Description: 1、arm7芯片2138驱动大液晶
2、ym320240的液晶驱动
3、动态等待图标的显示
4、各种字符的显示。
-1, arm7 chip liquid crystal 2138 driver 2, ym320240 LCD Driver 3, dynamic wait icon display 4, a variety of characters in the display.
Platform: |
Size: 120832 |
Author: 王一 |
Hits:
Description: 2138串口通信,keil环境proteus仿真通过.-2138 serial communication, keil Proteus simulation environment through.
Platform: |
Size: 790528 |
Author: xuelang00seven |
Hits:
Description: 2138 实现AD采样 DA输出,keil环境proteus仿真通过.-2138 to achieve AD sampling DA output, keil Proteus simulation environment through.
Platform: |
Size: 1592320 |
Author: xuelang00seven |
Hits:
Description: LPC2131/2132/2134/2136/2138 微控制器是基于一个支持实时仿真和嵌入式跟踪的16/32 位
ARM7TDMI-S CPU，并带有32kB、64kB、128kB、256kB 和512kB 嵌入的高速Flash 存储器。128 位宽度
的存储器接口和独特的加速结构使32 位代码能够在最大时钟速率下运行。对代码规模有严格控制的应用可
使用16 位Thumb 模式将代码规模降低超过30 ，而性能的损失却很小。-LPC2131/2132/2134/2136/2138 microcontroller is based on a real-time simulation and embedded support for tracking 16/32-bit ARM7TDMI-S CPU, with 32kB, 64kB, 128kB, 256kB and 512kB of embedded high-speed Flash memory. 128-bit memory interface width and speed up the structure of a unique 32-bit code so that the maximum clock rate can run. The size of the code of the application of strict control may use 16-bit Thumb mode to reduce the code size of more than 30 , while the performance loss is very small.
Platform: |
Size: 389120 |
Author: 勾晓菲 |
Hits:
Description: This example program shows how to configure and use the
A/D Converter of the following microcontrollers:
* Philips LPC 2114/2119/2124/2129/2131/2132/2138/2194
After configuring the A/D Converter, the program reads
A/D channel 0 and outputs the converted value using the serial
port.
To run this program...
1. Select the Device (Project - Options for Target - Device)
2. Build the project (Project - Build Target)
3. Start the uVision Debugger
4. Open the Serial Window (View - Serial Window 1)
5. Click Run (F5)
6. Click on the Toolbox buttons to change input voltages
A debug script (debug.ini) creates buttons that set different
analog values in A/D channels. As the program runs, you
will see the A/D input and output change.
Other buttons create signals that generate sine wave
or sawtooth patterns as analog inputs. µ Vision3 users may
enable the built-in Logic Analyzer to view, measure and compare
these input signals graphically.-This example program shows how to configure and use the
A/D Converter of the following microcontrollers:
* Philips LPC 2114/2119/2124/2129/2131/2132/2138/2194
After configuring the A/D Converter, the program reads
A/D channel 0 and outputs the converted value using the serial
port.
To run this program...
1. Select the Device (Project- Options for Target- Device)
2. Build the project (Project- Build Target)
3. Start the uVision Debugger
4. Open the Serial Window (View- Serial Window 1)
5. Click Run (F5)
6. Click on the Toolbox buttons to change input voltages
A debug script (debug.ini) creates buttons that set different
analog values in A/D channels. As the program runs, you
will see the A/D input and output change.
Other buttons create signals that generate sine wave
or sawtooth patterns as analog inputs. µ Vision3 users may
enable the built-in Logic Analyzer to view, measure and compare
these input signals graphically.
Platform: |
Size: 64512 |
Author: asit |
Hits:
Description: 提供2138的与显示器，触摸屏的完整程序，显示器为320x240。-Provide 2138and monitors, touch screen complete program, Monitors displayed as 320x240.
Platform: |
Size: 596992 |
Author: 夏斌 |
Hits:
Description: This a sample code for LPC 2138-This is a sample code for LPC 2138
Platform: |
Size: 177152 |
Author: Shafik |
Hits:
Description: 使用STC51单片机读取ID卡卡号，并利用spi接口与LPC2138通信
ID卡读卡器、EM4095、STC、51、 2138-Microcontroller using STC51 ID card number to read and communicate using spi interface with LPC2138 ID card reader, EM4095, STC, 51, 2138
Platform: |
Size: 1825792 |
Author: 黄志海 |
Hits:
Description: example code for the CFAX LCD module using a Philips ARM LPC 2138 MCU.
Platform: |
Size: 4096 |
Author: Sandeep |
Hits: