Description: 按照给定指标采用模拟低通滤波器（巴特沃思低通）去逼近理想模拟低通滤波器 ，然后通过双线性变换法对模拟滤波器进行数字化，得到数字滤波器 。-Indicators in accordance with a given analog low-pass filter (Butterworth low-pass) to approximate the ideal analog low-pass filter, and then through the bilinear transformation method of digitizing analog filters, the digital filter. Platform: |
Size: 2048 |
Author:李文嘉 |
Hits:
Description: 录制一段自己的语音信号，并对录制的信号进行采样；画出采样后语音信号的时域波形和频谱图；给定滤波器的性能指标，采用窗函数法和双线性变换设计滤波器，并画出滤波器的频率响应；然后用自己设计的滤波器对采集的信号进行滤波，画出滤波后信号的时域波形和频谱，并对滤波前后的信号进行对比，分析信号的变化；回放语音信号；最后，设计一个信号处理系统界面。-Section of their own voice recording signal, and recording the signal sampling draw sample after the speech signal time-domain waveform and frequency spectrum given filter performance indicators, using a window function method and bilinear transformation design of filters, and draw the frequency response filter then use the filter of their own design for the signal acquisition filtering, after filtering the signal to draw the time-domain waveform and spectrum, and filtering of signals before and after contrast, analysis of signal changes playback voice signal Finally, the design of a signal processing system interface. Platform: |
Size: 143360 |
Author:joe |
Hits:
Description: 按照给定指标采用模拟巴特沃斯低通滤波器去逼近理想模拟低通滤波器 ，然后通过双线性变换法对模拟滤波器进行数字化，得到数字滤波器 -Indicators in accordance with a given analog Butterworth low-pass filter to approximate the ideal analog low-pass filter, and then through the bilinear transformation method of digitizing analog filters, digital filters have been Platform: |
Size: 1024 |
Author:凌丽 |
Hits:
Description: （原创）包括冲激响应不变法设计ButterWorth数字低通滤波器、双线性变换法设计ButterWorth数字低通滤波器、和双线性变换法设计ChebyshevI型数字低通滤波器-(Original) includes the same impulse response ButterWorth Design of digital low-pass filters, bilinear transform design ButterWorth digital low-pass filter, and the bilinear transform design ChebyshevI digital low-pass filter Platform: |
Size: 1024 |
Author:anchor |
Hits:
Description: 包括信号系统和系统响应，FFT谱分析，双线性法设计IIR数字滤波器，窗函数法设计FIR数字滤波器，四部分matlab仿真程序，以及必要的说明。-Including the signal system and the system response, FFT spectrum analysis, bilinear Design of IIR digital filters, window function method for the design FIR digital filters, four-part matlab simulation program, and the necessary instructions. Platform: |
Size: 696320 |
Author:倪宁 |
Hits:
Description: 本实验首先按照给定技术指标采用模拟低通滤波器（巴特沃思低通滤波器）去逼近理想模拟低通滤波器，然后通过双线性变换法对模拟滤波器进行数字化，得到数字滤波器。-In this study, first of all technical specifications in accordance with a given analog low-pass filter (Butterworth low-pass filter) to approximate the ideal analog low-pass filter, and then through the bilinear transformation method of the digitization of analog filters, digital filters are . Platform: |
Size: 24576 |
Author:cuiqida |
Hits:
Description: 设计一个IIR数字低通滤波器， 逼近一组模拟滤波器的指标参数（通带截止频率Wp=2*pi*2000rad/s,阻带边界频率Ws=2*pi*3000rad/s,通带波纹 Rp=3db, 阻带衰减Rs=15db, 采样频率f=10000Hz）； 分别用脉冲响应不变法和双线性变换法实现设计，列出传递函数并描绘模拟和数字滤波器的幅频和相频响应曲线。用上述设计滤波器完成几组给定信号的滤波，证明滤波器的有效性和滤波范围限制.-Design a IIR digital low-pass filter, approaching a group of analog filters indicator parameters (pass-band cut-off frequency Wp = 2* pi* 2000rad/s, stop-band edge frequency Ws = 2* pi* 3000rad/s, pass-band ripple Rp = 3db, stop-band attenuation Rs = 15db, the sampling frequency f = 10000Hz) were used to change the impulse response method and bilinear transformation method for design, list and describe the transfer function of analog and digital filter amplitude-frequency and phase-frequency response curve. A filter was designed with the completion of the above-mentioned groups of a given signal filtering, to prove the effectiveness of filters and filter limit Platform: |
Size: 71680 |
Author:刘文珍 |
Hits:
Description: 1、不同阶次模拟巴特沃兹滤波器的频率响应
2、根据模拟滤波器指标，设计低通巴特沃兹滤波器
要求通带截止频率 fp = 5kHz, 通带最大衰减 ɑp =2dB， 阻带截止频率 fs= 12kHz, 阻
带最小衰减ɑs =30dB,按照上述指标设计巴特沃兹低通滤波器。
3、给定模拟滤波器，按照不同采样频率设计数字 IIR，观察采样频率对设计结果的影响
已知模拟滤波器传输函数 H(s)为
2
0.5012
( )
0.6449 0.7079
H s
s s
=
+ +
按照不同采样频率 Fs1=1Hz, Fs2=10Hz 使用脉冲响应不变法将 H(s)转换为 H(z)数字
IIR 滤波器。观察不同采样频率设计得到的数字 IIR 的差异。
4、给定数字 IIR 指标，用脉冲响应不变法设计 IIR。
数字低通滤波器的指标为: 0.2 , 1 , 0.3 , 15
p p s s
ω π α ω π α = = = = dB dB ,使用巴特沃
兹滤波器设计数字 IIR。比较采样频率 Fs=1， 2 时设计过程中的模拟滤波器，数字滤波
器的变化。
5、用双线性变换法设计 IIR，并同脉冲响应不变法比较设计的结果。数字滤波器指标要
求如下
0.2 , 1 , 0.3 , 15
p p s s
ω π α ω π α = = = = dB dB(1.Grasp the impulse response method and bilinear transformation design IIR filter principle and specific design methods, familiar with double
A computer program for designing lowpass, bandpass and highpass IIR digital filters by linear design;
2 . familiar with the design of analog Butterworth filter, master impulse response method and bilinear transformation method to design digital IIR
Filter method) Platform: |
Size: 4096 |
Author:花祭嘉音
|
Hits:
Description: 模拟低通滤波器的巴特沃思逼近、切比雪夫型逼近方法；从模拟低通到模拟高通、带通、带阻的频率变换法；从模拟滤波器到数字滤波器的脉冲响应不变法、双线性变换法的基本概念、基本理论和基本方法。
巴特沃思、切比雪夫模拟低通滤波器的设计方法；利用模拟域频率变换设计模拟高通、带通、带阻滤波器的方法。
利用脉冲响应不变法、双线性变换法设计数字滤波器的基本方法；能熟练设计巴特沃思、切比雪夫低通、带通、高通、带阻数字滤波器。
利用 MATLAB 直接进行各类数字滤波器的设计方法。(The basic concepts, theories and methods of Butterworth approximation and Chebyshev approximation of analog low-pass filter, frequency conversion from analog low-pass to analog high pass, band-pass and band stop, impulse response immutability from analog filter to digital filter and bilinear transformation.
Butterworth and Chebyshev design method of analog low-pass filter; design method of analog high pass, band-pass and band stop filter by using analog domain frequency conversion.
The basic method of designing digital filter by using impulse response invariant method and bilinear transformation method; be able to skillfully design Butterworth, Chebyshev low-pass, band-pass, high pass and band stop digital filter.
Matlab is used to design all kinds of digital filters directly.) Platform: |
Size: 8192 |
Author:无_kkx |
Hits:
Search - Bilinear digital filters matlab