Location:
Search - LPC UCOS ADS
Search list
Description: uCOS-IIV2.86 ADS LPC
Platform: |
Size: 387962 |
Author: 崔敬军 |
Hits:
Description: 本人自己移置的ucosii2.76代码，适用于lpc22xx,lpc21xx，目前已经在实际项目中使用，代码中提供有建好的项目。开发环境为ads1.2。-shift their own ucosii2.76 code applies to lpc22xx, lpc21xx, now in the actual use of the project, code for the project is completed. Development environment for ads1.2.
Platform: |
Size: 727040 |
Author: |
Hits:
Description: LPC2200+ucOS-II+ADS平台下的网络开发代码包,包括各层协议-LPC2200 ucOS-II ADS platform of network development code, including all levels of agreement
Platform: |
Size: 33792 |
Author: 杨羽凌 |
Hits:
Description: ucosii2.71版在LPC213X系列ARM7上的ADS工程模板，直接添加用户任务即可-ucosii2.71 version of the ARM7 LPC213X series on the ADS project templates, add users to directly task can be
Platform: |
Size: 556032 |
Author: 梁锋 |
Hits:
Description: uc/OS ii 2.80在lpc22xx移植
支持255个任务-uc/OS ii lpc22xx 2.80 in 255 transplant support tasks
Platform: |
Size: 199680 |
Author: 孙卓君 |
Hits:
Description: 关于 uC/OS-II 在 LPC210X 上移植的说明
1. 全部代码在 ADS1.2 中编译调试.
2. 您可以更改 RO BASE 为 0x0000 0000, 这样可以将代码写入 flash 中运行.
5. 全部代码采用 ARM 指令.
6. uC/OS-II 版本为 V2.52.
7. 当您暂停程序的时候, 如果定时器开着, 那么定时器并不会暂停,需要注意
8. Vectors.S 文件中的 startup 段为程序入口.
9. 编译时下面的警告不必理会.
Warning : C2871W: static OS_InitTaskStat declared but not used
OS_CORE.C line 1108
10. 如果您想通过软件仿真,请将 PLL.C 中的第 51 行屏蔽, 怎样就可以看到任务逐个切换,最后将进入空闲任务.
11. 此次移植将许多 uC/OS-II 的功能函数都关闭了,请查看 OS_CFG.H 文件.-on Phone/OS-II in the MCU on the note a transplant. All the code in degenerate. 2 compiler debugging. 2. You can change to the RO BASE 0x0000 0000, This code can be written into the flash run. 5. all code using ARM instructions. 6. uC/OS- II Version V2.52. 7. When you suspend the procedures, if the timer drive, then the timer will not be suspended need to 8. Vectors.S document of the startup procedures for entrance. 9. The following was compiled to disregard the warning. Warning : C2871W : static OS_InitTaskStat declared but not used O S_CORE.C line 1108 10. If you want to use software simulation, I would be grateful if PLL.C the first 51 firms shielding, you can see how each task switching, Finally, enter idle task. 11. This transplant of many embedded/OS-II functional functions are c
Platform: |
Size: 246784 |
Author: 百度哥2010 |
Hits:
Description: The latest release, ver 1.16 of the ARM (7TDMI, 720T, 920T) port for uC/OS-II V2.61 (and higher) includes ports for the following platforms:
1. S3c2410x ( ARM920T from Samsung ) on SMDK2410 eval board.
2. LPC2xxx - LPC210x & LPC213x ( ARM7TDMI-S from Philips ) on IAR s Kickstart & OLIMEX boards.
3. EP7312 ( ARM720T from CIRRUS ) on CDK238 eval board. Should also work on boards based on the CS89712.
Tool-chains: GCC 3.3.2, ADS 1.2 & SDT 2.51.
Op-modes: Pure ARM & ARM-THUMB interworked.
Endianess: Big endian & Little endian modes-The latest release, ver 1.16 of the ARM (7TDMI, 720T, 920T) port for uC/OS-II V2.61 (and higher) includes ports for the following platforms:
1. S3c2410x ( ARM920T from Samsung ) on SMDK2410 eval board.
2. LPC2xxx- LPC210x & LPC213x ( ARM7TDMI-S from Philips ) on IAR s Kickstart & OLIMEX boards.
3. EP7312 ( ARM720T from CIRRUS ) on CDK238 eval board. Should also work on boards based on the CS89712.
Tool-chains: GCC 3.3.2, ADS 1.2 & SDT 2.51.
Op-modes: Pure ARM & ARM-THUMB interworked.
Endianess: Big endian & Little endian modes
Platform: |
Size: 368640 |
Author: 谢志俊 |
Hits:
Description: 在LPC2138上的uCOS-II的代码，开发环境是IAR-In the LPC2138 on uCOS-II code, development environment is the IAR
Platform: |
Size: 3450880 |
Author: 周春喜 |
Hits:
Description: ucos2.85移植LPC2104的接口和原代码-LPC2104 transplantation ucos2.85 interface and the original code
Platform: |
Size: 318464 |
Author: liuqiang |
Hits:
Description: ADS下ARM7lpc21xx的ＵＣＯＳ范例程序-ADS under the ARM7lpc21xx uCOS Example procedures
Platform: |
Size: 111616 |
Author: |
Hits:
Description: uCOS-IIV2.86 ADS LPC
Platform: |
Size: 388096 |
Author: Rover |
Hits:
Description: KEIL下的LPC2104的UCOS移植,网上的都是ADS的,且很多有错误,需改写一部分代码才可用.这是我用ADS改的,带有PROTEUS仿真,绝对可用,无需任何改动就可编译通过.-KEIL under the uCOS LPC2104 transplantation, ADS are online, and that many errors, need to rewrite part of the code can be used. This is what I changed to use ADS with PROTEUS simulation, the absolute can be used without any changes to be compiled through .
Platform: |
Size: 307200 |
Author: 韩笑 |
Hits:
Description: LPC2138能正常运行UCOS的代码，开发环境是ADS1.2的，里面有周立功的ucgui,还有信号量，邮箱的操作，其中有三个任务-LPC2138 can UCOS the normal operation of the code, development environment is the ADS1.2, there are weeks of Ligong ucgui, there are semaphores, mail operations, of which there are three tasks
Platform: |
Size: 477184 |
Author: wangdongxu |
Hits:
Description: uC OS for MCU. With Detailed documents
Platform: |
Size: 947200 |
Author: hb gao |
Hits:
Description: ucos2.52下基于LPC2400系列mcu的CAN总线数据收发源码，中断接收，ads环境。-can data receive and send base on LPC2400 use ucos2.52,receive interupt,in ads environment.
Platform: |
Size: 402432 |
Author: yiyuhang |
Hits:
Description: uCOS-II v2.52 在lpc2000系列ARM上的移植源代码， 配合相应的工程模板使用,在ads1.2中调试通过-uCOS-II v2.52 in lpc2000 series of portable source code on the ARM, with the appropriate use of project templates, debugging through the ads1.2
Platform: |
Size: 40960 |
Author: ads1_2 |
Hits:
Description: uCOS工程模板 ADS环境下 NXP LPC-uCOS project templates
Platform: |
Size: 43008 |
Author: 李四 |
Hits: