Location:
Search - Nand usb
Search list
Description: USB驱动程序,和NANDflash的驱动, 包括文件系统,cpu是arm-USB drivers, and NAND flash in the drive, including the file system, cpu is arm
Platform: |
Size: 216064 |
Author: 常静 |
Hits:
Description: 这是51读写U盘源程序和原理图,希望对开发USB的兄弟一些参考.-Source code for USB mass storage read/write with description.
Platform: |
Size: 86016 |
Author: HEDN |
Hits:
Description: U盘,ST7267 平台的代码.自己的初始华部分-USB ST7267 platform code. The initial part of China
Platform: |
Size: 994304 |
Author: 徐小华 |
Hits:
Description: 第一版YL2410开发板的BIOS
功能比较简单，上电之后，LCD显示蓝色、绿色、红色三个竖条
同时串口显示如下：
Power on reset
************************************
* *
* YL2410 Board BIOS V2006 *
* Http://www.ucdragon.com *
* *
************************************
NAND Flash Boot
Please select function :
0 : USB download file（通过USB下载文件）
1 : Uart download file（通过串口下载文件）
2 : Write Nand flash with download file（将下载的文件烧写到NandFlash）
3 : Load Pragram from Nand flash and run（从NandFlash装载文件并运行）
4 : Erase Nand flash regions（擦除NandFlash区域）
5 : Write NOR flash with download file（将下载的文件烧写到NorFlash）
6 : Set boot params（设置Linux启动相关参数）
7 : Set AutoBoot parameter,1:linux 2:wince(设置WINCE自启动）
-Commentator YL2410 development board BIOS functions are relatively simple, electricity, LCD blue, green, red and three vertical lines while serial is shown below : Power on reset***************************************************** YL2410 Board BIOS V2006** Http :// www.ucdragon.com************** Attention duty announcers NAND Flash Boot Please sele ct function : 0 : USB download file (through USB download) 1 : Uart download file (via serial port download) 2 : Write Nand flash with download file (download the burning of documents NandFlash) 3 : Load Pragram from Nand flash and run (from NandFlas h load and run) 4 : Erase Nand flash regions (erasure NandFlash regional) 5 : Write NOR flash with download file (download the document to the burning N orFlash) 6 : Set boot params (i
Platform: |
Size: 408576 |
Author: wind |
Hits:
Description: 基于44b0和三星的nand-flash k9f5608的u盘开发-44b0-based and Samsung nand-flash k9f5608 the u disk development
Platform: |
Size: 217088 |
Author: 黎明 |
Hits:
Description: ARM7处理器的系统测试源码，汇编和C组成，具有norflash、nandflash、sdram、LCD、IIC、232、NET、USB、RLT等功能，可组成一个完整的处理终端，当然要有相应的硬件支持，供大家参考！-ARM7 processor system testing source code, compile and C composed norflash, nandflash, sdram, LCD, IIC, 232, NET, USB, RLT and other functions, can handle a complete end, of course, have corresponding hardware support for your information!
Platform: |
Size: 1299456 |
Author: 牧羊犬 |
Hits:
Description: NAND Flash Boot
Please select function :
0 : USB download file（通过USB下载文件）
1 : Uart download file（通过串口下载文件）
2 : Write Nand flash with download file（将下载的文件烧写到NandFlash）
3 : Load Pragram from Nand flash and run（从NandFlash装载文件并运行）
4 : Erase Nand flash regions（擦除NandFlash区域）
5 : Write NOR flash with download file（将下载的文件烧写到NorFlash）
6 : Set boot params（设置Linux启动相关参数）
7 : Set AutoBoot parameter,1:linux 2:wince(设置WINCE自启动）-NAND Flash BootPlease select function: 0: USB download file (through the USB to download files) 1: Uart download file (through the serial port to download files) 2: Write Nand flash with download file (the downloaded file to the programmer NandFlash) 3: Load Pragram from Nand flash and run (from the NANDFLASH loading files and running) 4: Erase Nand flash regions (Erase the NANDFLASH region) 5: Write NOR flash with download file (the downloaded file to the programmer NorFlash) 6: Set boot params ( Linux set to start the relevant parameters) 7: Set AutoBoot parameter, 1: linux 2: wince (set up since the launch of WINCE)
Platform: |
Size: 409600 |
Author: yang |
Hits:
Description: vivi是MIZI公司开发的系统引导程序,原本只支持串口下载。本文以S3C2410处理器加CS8900网络芯片为例,介绍一种在vivi基础上增加网络支持的设计方法，使vivi能够通过TFTP下载文件，可以有效地缩短系统的开发周期，方便用户使用。
关键词 vivi Bootloader TFTP协议 网络功能扩展
随着嵌入式的发展，基于ARM的系统越来越流行。在开发ARM系统时，第一步就是要选择一种合适的Bootloader。目前网络上可得到的Bootloader很多，一般几十KB，所以除非要求把Bootloader限制在几KB以内，否则没有必要自己去写一个Bootloader。Bootloader一般存放在Flash中。当前主流的Flash分为NOR Flash和NAND Flash。前者价格比后者高出很多，而性能相差无几。如果系统采用的是NAND Flash，那么vivi可能会是一个好的选择。-err
Platform: |
Size: 504832 |
Author: |
Hits:
Description: U盘控制器USB97C223的固件代码,对2kPAGE NAND FLASH 有很好的支持.-U disk controller firmware USB97C223 code, 2kPAGE NAND FLASH to have very good support.
Platform: |
Size: 1019904 |
Author: xu |
Hits:
Description: QT2410的BOOTLOADER
特点
1.支援NAND FLASH读写
2.TFTP firmware upgrade
3.USB firmware upgrade
4.Fdisk
-Features one of the QT2410 BootLoader. Support NAND FLASH to read and write 2.TFTP firmware upgrade3.USB firmware upgrade4.Fdisk
Platform: |
Size: 499712 |
Author: Joey |
Hits:
Description: 用的是三星的S3C44B0X，板子上有8M SDRAM、2M NOR FLASH、16M NAND FLASH、USB接口和两个串口 5-Using a Samsung S3C44B0X, board have 8M SDRAM, 2M NOR FLASH, 16M NAND FLASH, USB interface and two serial 5
Platform: |
Size: 2971648 |
Author: 陈晓东 |
Hits:
Description: u-boot.bin是使用JTAG转换板来烧写到AT2440EVB开发板上Nand flash(K9F1208)中-u-boot.bin is to use the JTAG programmer to the conversion plate to AT2440EVB development board Nand flash (K9F1208) in
Platform: |
Size: 9754624 |
Author: jianglingling |
Hits:
Description: 带Java扩展的ARM926EJ-S内核, 2 x 8KB快取, MMU
2x4k Bytes SRAM, 32kBytes Boot ROM
210MHz, 230MIPs
EBI –可支持SDRAM, NAND Flash (带ECC)和Compact Flash
USB控制器和USB器件口, V2.0全速
Ethernet MAC - 10/100
图像传感器界面 (CMOS传感器界面)
1 SSC可支持I2S和TDM
2 SPI, MCI (SDCard和MMC兼容), TWI
6 USARTs, 支持IrDA, ISO7816 T=0/T=1, RS485-Java extension with ARM926EJ-S core, 2 x 8KB cache, MMU2x4k Bytes SRAM, 32kBytes Boot ROM210MHz, 230MIPsEBI- can support SDRAM, NAND Flash (with ECC) and Compact FlashUSB controller and the USB device port, V2.0 full speed Ethernet MAC- 10/100 Image Sensor Interface (CMOS sensor interface) 1 SSC can support I2S and TDM2 SPI, MCI (SDCard and MMC compatible), TWI6 USARTs, support for IrDA, ISO7816 T = 0/T = 1, RS485
Platform: |
Size: 2477056 |
Author: xujj |
Hits:
Description: i.mx27开发板的整套详细原理图，包括：DDR SDRAM, NAND FLASH, NOR FLASH, USB OTG, USB HOST,FEC PHY, UART,JTAG等等接口-i.MX27 development board schematic details of the package, including: DDR SDRAM, NAND FLASH, NOR FLASH, USB OTG, USB HOST, FEC PHY, UART, JTAG interface, etc.
Platform: |
Size: 741376 |
Author: 清木 |
Hits:
Description: 支持S3C24x0/yaffs/USB/CS8900/DM9000/OpenJTAG/Nor,Nand启动的u-boot
添加的功能：
1. 同时支持S3C2410和S3C2440
2. 支持串口xmodem协议
3. 支持USB下载，可以在PC上使用dnw传数据
4. 支持网卡芯片CS8900
5. 支持NAND Flash读写
6. 支持从Nor/Nand Flash启动
7. 支持烧写yaffs文件系统映象-Support S3C24x0/yaffs/USB/CS8900/DM9000/OpenJTAG/Nor, Nand start u-boot to add the functionality: 1. At the same time, support for S3C2410 and S3C24402. Support XMODEM Serial Protocol 3. To support the USB to download, you can use the PC on dnw Chuan-data 4. to support the network adapter chip CS89005. support for NAND Flash read and write 6. support from the Nor/Nand Flash boot 7. yaffs file system support programmer mapping
Platform: |
Size: 126976 |
Author: qin |
Hits:
Description: LPC2132、2148下测试可用的USB+FLASH控制方案源代码。-LPC2132, 2148 to test the available USB+ FLASH control program source code.
Platform: |
Size: 140288 |
Author: 蔡明 |
Hits:
Description: Full Project Flash NAND Chips (TSOP-48) Reader OrCAD schematic circuit + Protel Altium PCB Design + Windows API, basic on C# Host USB Application + uVision4 (Keil) CY7C68013 design.
Platform: |
Size: 635904 |
Author: pleishner |
Hits:
Description: Nand flash control for ez-USB
Platform: |
Size: 50176 |
Author: Fang |
Hits:
Description: u-boot-1.1.6.tar.bz2 是uboot1.1.6最原始的代码
u-boot-1.1.6_OpenJTAG_nand_large_page.tar.bz2 是修改后的uboot，支持大页nand，usb烧写程序-u-boot-1.1.6.tar.bz2 is uboot1.1.6 most original code u-boot-1.1.6_OpenJTAG_nand_large_page.tar.bz2 is modified uboot, support for large page nand, usb programmer program
Platform: |
Size: 20496384 |
Author: 邵德鹏 |
Hits:
Description: 通过STM32的USB实现对SD卡和内部Flash，Nandflash的读写-access to the internal flash,SD card,and Nand flash using stm32
Platform: |
Size: 7067648 |
Author: caichao |
Hits: