Location:
Search - S3C44B0X LED
Search list
Description: ARM7 S3C44B0X 键盘及LED 驱动实验代码-ARM7 S3C44B0X keyboard and LED driver experimental code
Platform: |
Size: 112421 |
Author: 钱丽 |
Hits:
Description: 1. beep -- PWM测试
为 ADS1.2 下编译的项目, 在sdt2.51的ADW里调试，该程序运行后在57600的超级终端里按PC机键盘的“+”“-” 按键，可以听到BUZZ增大减小的声音。
2. key -- 按键测试
为 SDT2.51 下编译的项目, 在sdt2.51的ADW里调试，该程序运行后按FS44B0X上的按键key1 key2 key3 key4 相应的发光二极管亮
3 keyint -- 按键中断测试
该项目在SDT2.51下编译调试。主程序是while空循环，中断服务程序对应四个按键做相应的处理，key1 按键点亮D1灯，并在串口打印信息，因为没有加按键去抖动程序，所以，一次按键，产生几次中断。
-1. Beep -- PWM ADS1.2 testing for the project under the Build, in the ADW sdt2.51 Lane debugging, after running the 57,600 in the Super Terminal Lane by PC keyboard "" "-" buttons, Buzz can be increased to reduce heard voices. 2. Key -- SDT2.51 key test for the project under the Build, in the ADW sdt2.51 Lane debugging, after running the program on the button FS44B0X key1 key2 key3 key4 corresponding LED top-three keyint -- interrupted test button in the project under the Build SDT2.51 debugging. While space is the main program cycle, interrupt service routine correspondence four keys handled accordingly. key1 D1 lights lit keys, and Serial Print information, because no buttons to increase jitter, and therefore, a button. several have interrupted.
Platform: |
Size: 507339 |
Author: 张淼林 |
Hits:
Description: 5 ledblink -- 跑马灯程序
该项目在SDT2.51下编译调试。最简单的demo程序，运行后3个发光二极管轮流点亮。
6 timerint -- 定时器中断demo程序
该项目在SDT2.51下编译调试。将子目录timerint拷贝到c:\\ 下。
该demo程序的主程序是while空循环，定时器中断服务程序每500ms将3个LED反相。
在57600超级终端里也可以看到中断发生时的信息。
7 uart -- 串口测试程序
该项目在SDT2.51下编译调试。运行后在57600的超级终端里等待PC键盘的输入，当按下 a 或 b 或 c 按键时，超级终端里将显示 You Pressed a ,You Pressed b ,You Pressed c .
-5 ledblink -- 5,250 procedures for the project under the Build SDT2.51 debugging. The most simple demo, the running after three LED lights rotation. 6 timerint -- timer interruption demo procedures of the project under the Build SDT2.51 debugging. Will subdirectory timerint copy of the c : \\ under. The demo procedures while the main program is empty circle, the timer interruption of services in each of 500ms to RP-3 LED. The Super Terminal Lane 57600 can be seen at the time of the interruption information. 7 UART -- Serial testing procedures of the project under the Build SDT2.51 debugging. After running in the Super Terminal 57,600 awaiting the PC keyboard input, or when pressing a button b or c, Super Terminal Lane will be a show Pressed You, You Pressed b, You Pressed c.
Platform: |
Size: 249813 |
Author: 张淼林 |
Hits:
Description: LED指示灯程序。应用于S3C44B0X ARM板上的LED测试，程序运行后，开发板上的三个LED指示灯会来回闪烁。-LED indicator procedures. Applied S3C44B0X ARM board LED testing, operating procedures, the development board of three LED lights will flicker back and forth.
Platform: |
Size: 82399 |
Author: 李凌 |
Hits:
Description: 定时器时中断服务程序。运行后服务程序每500ms将S3C44B0X开发板上的三个LED指示灯反相。-timer interrupt service procedures. After running services in each of 500ms to S3C44B0X development board RP-3 LED indicators.
Platform: |
Size: 84267 |
Author: 李凌 |
Hits:
Description: ARM7的s3c44b0x连接键盘和ＬＥＤ数码管代码
Platform: |
Size: 102730 |
Author: feiyang |
Hits:
Description: s3c44b0 的开发板测试的所有源代码及程序！！！汇编代码主要完成系统初始化，包括：
禁止看门狗；
禁止所有中断；
初始化存储器（包括SDRAM）；
设定锁相环倍频；
使能所有单元模块时钟；
初始化堆栈；
设置中断等等
C语言代码主要是应用代码，包括：
设置使用指令缓存；
修改系统主时钟为32MHz；
IO端口功能、方向设定；
初始化中断；
初始化DMF50081液晶模块；
蜂鸣器测试；
液晶显示测试；
LED输出测试；
定时器、PWM测试等；
Platform: |
Size: 4392 |
Author: 叶凌 |
Hits:
Description: 4.0版综合测试实验，包括了LCD,LED,IIC,等很多功能的测试
Platform: |
Size: 450675 |
Author: wxwg8791@13.com |
Hits:
Description: CPU:S3C44B0X FLASH:HY29LV160BT 2M SDRAM:HY57V641620 8M 2 COM USB1.1 PDIUSBD12 NET RTL8019AS JTAG 14PIN LCD 接口 4 KEY 3 LED 峰鸣器 时钟电池-CPU : S3C44B0X FLASH : 2M SDRAM HY29LV160BT : HY57V641620 8M two COM USB 1.1 PDIUSBD12 NET RTL8019AS JTAG interface LCD 14PIN four LED KEY 3-Wong-clock battery
Platform: |
Size: 1812480 |
Author: 田昊 |
Hits:
Description: S3C44B0X开发板上USB应用代码，PC机部分的软件1) LEDDEMO -- 控制 SW44B0板上三个LED的程序2) D12_DRIVER_FOR_WIN98 -- USB芯片WIN98的驱动程序FS44B0X板的USB固件程序--源代码USB_DEMO-S3C44B0X development board USB application code, part of the PC software 1) LEDDEMO-- SW44B0 control board three LED procedures 2) D12_DRIVER_FOR_WIN98-- USB chip Win98 driver FS44B0X board USB Firmware-- source code USB_ DEMO
Platform: |
Size: 272384 |
Author: 李爱成 |
Hits:
Description: 这是三星arm s3c44b0x开发板上的一些实例程序，包括lcd，led，key，pwm，uart等-arm s3c44b0x development board some examples of procedures, including LCD, led, key, PWM, UART, etc.
Platform: |
Size: 779264 |
Author: cguo |
Hits:
Description: ARM7 S3C44B0X 键盘及LED 驱动实验代码-ARM7 S3C44B0X keyboard and LED driver experimental code
Platform: |
Size: 112640 |
Author: 钱丽 |
Hits:
Description: SUMSUNG S3C44B0X ARM7的一个RTC实时时钟的显示和修改的例程-SUMSUNG S3C44B0X an ARM7 RTC real time clock and the display changes routines
Platform: |
Size: 29696 |
Author: 旺真 |
Hits:
Description: 1. beep -- PWM测试
为 ADS1.2 下编译的项目, 在sdt2.51的ADW里调试，该程序运行后在57600的超级终端里按PC机键盘的“+”“-” 按键，可以听到BUZZ增大减小的声音。
2. key -- 按键测试
为 SDT2.51 下编译的项目, 在sdt2.51的ADW里调试，该程序运行后按FS44B0X上的按键key1 key2 key3 key4 相应的发光二极管亮
3 keyint -- 按键中断测试
该项目在SDT2.51下编译调试。主程序是while空循环，中断服务程序对应四个按键做相应的处理，key1 按键点亮D1灯，并在串口打印信息，因为没有加按键去抖动程序，所以，一次按键，产生几次中断。
-1. Beep-- PWM ADS1.2 testing for the project under the Build, in the ADW sdt2.51 Lane debugging, after running the 57,600 in the Super Terminal Lane by PC keyboard "" "-" buttons, Buzz can be increased to reduce heard voices. 2. Key-- SDT2.51 key test for the project under the Build, in the ADW sdt2.51 Lane debugging, after running the program on the button FS44B0X key1 key2 key3 key4 corresponding LED top-three keyint-- interrupted test button in the project under the Build SDT2.51 debugging. While space is the main program cycle, interrupt service routine correspondence four keys handled accordingly. key1 D1 lights lit keys, and Serial Print information, because no buttons to increase jitter, and therefore, a button. several have interrupted.
Platform: |
Size: 506880 |
Author: 张淼林 |
Hits:
Description: 5 ledblink -- 跑马灯程序
该项目在SDT2.51下编译调试。最简单的demo程序，运行后3个发光二极管轮流点亮。
6 timerint -- 定时器中断demo程序
该项目在SDT2.51下编译调试。将子目录timerint拷贝到c:\ 下。
该demo程序的主程序是while空循环，定时器中断服务程序每500ms将3个LED反相。
在57600超级终端里也可以看到中断发生时的信息。
7 uart -- 串口测试程序
该项目在SDT2.51下编译调试。运行后在57600的超级终端里等待PC键盘的输入，当按下 a 或 b 或 c 按键时，超级终端里将显示 You Pressed a ,You Pressed b ,You Pressed c .
-5 ledblink-- 5,250 procedures for the project under the Build SDT2.51 debugging. The most simple demo, the running after three LED lights rotation. 6 timerint-- timer interruption demo procedures of the project under the Build SDT2.51 debugging. Will subdirectory timerint copy of the c : \ under. The demo procedures while the main program is empty circle, the timer interruption of services in each of 500ms to RP-3 LED. The Super Terminal Lane 57600 can be seen at the time of the interruption information. 7 UART-- Serial testing procedures of the project under the Build SDT2.51 debugging. After running in the Super Terminal 57,600 awaiting the PC keyboard input, or when pressing a button b or c, Super Terminal Lane will be a show Pressed You, You Pressed b, You Pressed c.
Platform: |
Size: 249856 |
Author: 张淼林 |
Hits:
Description: LED指示灯程序。应用于S3C44B0X ARM板上的LED测试，程序运行后，开发板上的三个LED指示灯会来回闪烁。-LED indicator procedures. Applied S3C44B0X ARM board LED testing, operating procedures, the development board of three LED lights will flicker back and forth.
Platform: |
Size: 81920 |
Author: 李凌 |
Hits:
Description: 定时器时中断服务程序。运行后服务程序每500ms将S3C44B0X开发板上的三个LED指示灯反相。-timer interrupt service procedures. After running services in each of 500ms to S3C44B0X development board RP-3 LED indicators.
Platform: |
Size: 83968 |
Author: 李凌 |
Hits:
Description: ARM7的s3c44b0x连接键盘和ＬＥＤ数码管代码-ARM7-S3C44B0X connect the keyboard and LED digital tube code
Platform: |
Size: 108544 |
Author: feiyang |
Hits:
Description: s3c44b0 的开发板测试的所有源代码及程序！！！汇编代码主要完成系统初始化，包括：
禁止看门狗；
禁止所有中断；
初始化存储器（包括SDRAM）；
设定锁相环倍频；
使能所有单元模块时钟；
初始化堆栈；
设置中断等等
C语言代码主要是应用代码，包括：
设置使用指令缓存；
修改系统主时钟为32MHz；
IO端口功能、方向设定；
初始化中断；
初始化DMF50081液晶模块；
蜂鸣器测试；
液晶显示测试；
LED输出测试；
定时器、PWM测试等；-S3C44B0 development board to test all source code and procedures! ! ! Assembly code to initialize the main complete system, including: the prohibition of watchdog ban all interrupted initialize memory (including SDRAM) set PLL multiplier so that all clock modules initialize stack settings interruption, etc. C language code is application code, including: the use of instruction cache settings modify the system master clock is 32MHz IO port functions, the direction of settings initialization interrupt DMF50081 LCD module initialization buzzer test LCD test LED output test timer, PWM testing
Platform: |
Size: 4096 |
Author: 叶凌 |
Hits:
Description: ARM 初学者的入门程序,点亮LED灯的程式序..很详细的注册语句.可加我QQ251199938与我联系.交流.-ARM 初学者的入门程序.很详细的注册语句.可加我QQ251199938与我联系.交流.
Platform: |
Size: 18432 |
Author: luwei |
Hits: