Description: 设计的温度采集模块是应用一个滑动变阻器通过改变电阻值进行模拟的温度值改变情况；模数转换模块是运用ADC0809芯片进行模数的转换，把采集到的模拟电压值变为数字值；单片机控制系统通过程序判断此数字值的大小，这样控制温度报警模块，一方面控制发光二极管的亮灭情况，另一方面控制蜂鸣器的报警；温度显示模块应用四位数码管显示模拟的温度值。因此，构成了此模拟的温度控制系统。本系统主要实现了模拟的温度值在30到60的一个设定范围内，正常显示温度，一旦超过了此范围，就会有报警。-design of the temperature acquisition module is the application of a sliding rheostat by changing resistor value simulated temperature change ; analog-to-digital conversion module Connection between ADC 0809 chip is used for the conversion module, Acquisition to put the value into voltage simulated digital value; SCM control system through the procedures to judge the value of this size figures, This temperature alarm control module, on the one hand to control the LED-destruction, the other to control the buzzer sounded alarm; Temperature Display Module application of four digital simulation shows that the temperature value. Therefore, this constitutes a simulation of the temperature control system. The system achieved a simulation of temperature from 30 to 60 in the context of a set, showe Platform: |
Size: 1411 |
Author:秦光 |
Hits:
Description: 步进电机步距角细分单片机控制系统设计与研究-stepper motor breakdown step angle SCM Control System Design and Research Platform: |
Size: 83406 |
Author:王 |
Hits:
Description: 步进电机步距角细分单片机控制系统设计与研究-stepper motor breakdown step angle SCM Control System Design and Research Platform: |
Size: 82944 |
Author:王 |
Hits:
Description: 设计的温度采集模块是应用一个滑动变阻器通过改变电阻值进行模拟的温度值改变情况；模数转换模块是运用ADC0809芯片进行模数的转换，把采集到的模拟电压值变为数字值；单片机控制系统通过程序判断此数字值的大小，这样控制温度报警模块，一方面控制发光二极管的亮灭情况，另一方面控制蜂鸣器的报警；温度显示模块应用四位数码管显示模拟的温度值。因此，构成了此模拟的温度控制系统。本系统主要实现了模拟的温度值在30到60的一个设定范围内，正常显示温度，一旦超过了此范围，就会有报警。-design of the temperature acquisition module is the application of a sliding rheostat by changing resistor value simulated temperature change ; analog-to-digital conversion module Connection between ADC 0809 chip is used for the conversion module, Acquisition to put the value into voltage simulated digital value; SCM control system through the procedures to judge the value of this size figures, This temperature alarm control module, on the one hand to control the LED-destruction, the other to control the buzzer sounded alarm; Temperature Display Module application of four digital simulation shows that the temperature value. Therefore, this constitutes a simulation of the temperature control system. The system achieved a simulation of temperature from 30 to 60 in the context of a set, showe Platform: |
Size: 1024 |
Author:秦光 |
Hits:
Description: 用单片机实现电梯控制系统
电梯控制系统的工作原理是：当某
层有要梯信号输入时，呼梯信号锁存系
统将要梯信号锁存，待单片机查询到要
梯信号后，根据要梯信号的位置(即楼
层数)和电梯所处的位置，决定电梯运
行方向，并启动电梯到要梯层停梯、开
门，待乘客进入电梯关门后，再根据乘
客要求把乘客送到目的层。-with MCU elevator control system of the elevator control system working principle is : When a staircase layer to the input signal, calling signal latch system will be staircase signal latches, SCM pending inquiries to the staircase to signal, according to the location staircase signal (that is, number of floors) and the locations of elevators, decide the direction of the lift operation, and start to the elevator to stop staircase layer Ossetia, opened the door, the passengers entered the elevator closed, According passengers require passengers to the target zone. Platform: |
Size: 111616 |
Author:方凯旋 |
Hits:
Description: 单片机控制洗衣机系统，该程序主要是实现洗衣的整个过程，包括洗衣，各个子程序的调用，LED灯的显示，显示子程序。-SCM washing system, the program is mainly Laundry realize the whole process, including the laundry, each subroutine call, LED lights display, showing subroutine. Platform: |
Size: 36864 |
Author:zhanghui |
Hits:
Description: 本设计采用ATMEL公司的AT89S52单片机和红外遥控技术实现近距离无线通信的软硬件系统。为了使受控设备识别信号，设计一种数字信号编码系统，利用红外线将数字信号调制，而数据的解码则由另外的单片机完成，系统的实现简单。-This design uses ATMEL Corporation AT89S52 MCU and infrared remote control technology to achieve a short distance wireless communications hardware and software systems. Controlled equipment in order to enable the identification signal, the design of a digital signal coding system, using infra-red digital signal modulation, and data from other single-chip decoder completed, the system simple. Platform: |
Size: 348160 |
Author:周千 |
Hits:
Description: 控制系统单片机的开发与使用，仅供大家学习参考使用
-SCM control system development and use them to learn from their use and reference purposes only Platform: |
Size: 503808 |
Author:陈森 |
Hits:
Description: 本文介绍了水温测控系统的工作原理、设计电路和调试过程，给出了硬件部分的详细说明，包括原理和电路图，以及单片机软件部分的算法、流程。-This article describes the working principle of temperature measurement and control system, circuit design and debugging process, gives a detailed description of the hardware components, including the principles and schematic, as well as part of SCM software, algorithms, processes. Platform: |
Size: 293888 |
Author:王海龙 |
Hits:
Description: 基于avr模拟电梯控制系统 包括源码电路图-Avr-based elevator control system consists of analog source circuit Platform: |
Size: 893952 |
Author:whyaiwhy |
Hits:
Description: 自动加料机控制系统:
本设计的由单片机控制的自动加料系统是与料斗式干燥机配套的加料系统。根据加料工艺要求，其工作原理是：先将真空管关闭，启动电机，用低真空气流将塑料树脂粒子送入真空管，电机停转，再将粒子排入料斗，如此循环。-Automatic feeding machine control system: The design of the automatic feeding from the SCM control system with hopper dryer supporting feeding system. According to charging process requirements, its working principle is: first vacuum tube off, start the motor, using low vacuum flow of plastic resin particles into the vacuum tube, motor stall, and then particles into the hopper, and so on. Platform: |
Size: 382976 |
Author:虫子 |
Hits:
Description: 利用SM8952AC25P、MT8870、TC35 modem和各类家居传感器设计制作一款智能家居控制系统！单片机采用AT89S52，晶振频率为：12.00MHz，这是C语言源代码！-Using SM8952AC25P, MT8870, TC35 modem and various types of home sensors designed a smart home control system! SCM AT89S52, crystal frequencies: 12.00MHz, which is the C language source code! Platform: |
Size: 3072 |
Author:李明 |
Hits:
Description: 基于单片机的交通灯控制系统：本文主要设计一种模拟现实交通灯运行情况的控制系统。该系统以单片机为核心，结合外部电路和程序，实现对现实道路中的人行道、左转、右转以及原有交通灯的控制功能。此外，还增加了一些扩展功能，使系统更加智能化。
文章重点介绍了该系统硬件和软件的设计与实现。硬件主要包括单片机控制模块、LED灯显示模块、LED时间显示模块、报警电路、键盘输入模块。软件主要包括时间调整、倒计时显示、交通灯控制、特殊状态切换。通过时间设置键、增加键实现放行时间的调整，采用点亮单色发光二极管模拟交通灯的实际情况，通过单片机控制数码管显示。系统可通过按键切换到特殊状态，用来处理紧急状况。该系统具有实用性强，操作简单，扩展性强等特点。
-Traffic Lights Control System Design Based on SCM Platform: |
Size: 24576 |
Author:cheetos |
Hits:
Description: 基于C51单片机关于一个简单水塔的控制系统，有完整的工程项目和Proteus仿真-C51 microcontroller based on a simple water tower on the control system, a complete simulation of the project, and Proteus
Platform: |
Size: 23552 |
Author:窦筱 |
Hits:
Description: 利用单片机作为中枢，使用DS18B20作为温度传感器，通过液晶显示模块显示实习温度及操作系统内容，通过按键设定温度范围。通过C语言程序编写代码实现温度检测控制与报警功能-SCM as a hub, use the DS18B20 temperature sensor , LCD module displays the attachment of the temperature and content of the operating system , set the temperature range over the keys . C language program to write code to achieve the temperature measurement and control and alarm function Platform: |
Size: 385024 |
Author:代戈壁 |
Hits:
Description: 单片机毕业论文：用集成温度传感器组成测温控制系统-SCM thesis: the temperature control system with integrated temperature sensor Platform: |
Size: 812032 |
Author:zgzzlt |
Hits:
Search - SCM control system