Location:
Search - Universal Motor
Search list
Description: 正转，转四相步进电机，每相间隔70ms。C51程序
51单片机通用。-Is to switch to four-phase stepper motor, each interval of 70ms. 51 Single-chip Universal C51 procedures.
Platform: |
Size: 1024 |
Author: 张山 |
Hits:
Description: 本文主要介绍了基于MSP430F149单片机实现的步进电机通用控制器。该控制器可同时控制多台步进电机按曲线方式运行，包括加减速、定位及换向功能等。文中重点探讨了步进电机升降速曲线的设计方案及其实现方法。 -In this paper, based on the MSP430F149 single-chip stepper motor to achieve universal controller. The controller can simultaneously control multiple stepper motor run by the curve, including acceleration and deceleration, positioning and reversing function. The article focuses on take-off and landing speed curve stepper motor design and its realization method.
Platform: |
Size: 16384 |
Author: 郑铭颖 |
Hits:
Description: This folder has two files for the simulation of universal motor. please run the *.m file to run the *.mdl file-This folder has two files for the simulation of universal motor. please run the*.m file to run the*.mdl file
Platform: |
Size: 4096 |
Author: netra |
Hits:
Description: EDA技术与VHDL 实用电路设计 步进电机和直流电机控制，VGA显示控制器设计，存储示波器设计，通用异步收发器设计，频率相位计设计，DDS设计，-EDA technology and VHDL practical circuit design stepper motors and DC motor control, VGA display controller design, storage oscilloscope design, universal asynchronous receiver design, frequency, phase meter design, DDS design,
Platform: |
Size: 1571840 |
Author: viet |
Hits:
Description: 万能打印机控制平台程序，实现电机上下进出控制以及液晶显示-Universal printer control platform program, the motor up and down out of control, and LCD
Platform: |
Size: 25600 |
Author: 刘伟明 |
Hits:
Description: 智能公交车控制：车体采用智能车竞赛专用车模，易于控制，直流电机采用驱动力强的MC33886芯片来驱动，测速部分主要以高精度的E6A2CW3C编码器为主体，传感器检测则是采用通用的红外传感器来检测。-Intelligent bus control: use intelligent car race car models, easy control, special driving force of dc motor using MC33886 chip to drive strong with high precision, the speed of the main E6A2CW3C encoder as the main body, sensor detection is the infrared sensors to using universal testing.
Platform: |
Size: 5120 |
Author: 张节 |
Hits:
Description: This circuit uses the AC6 block of SimPowerSystems™ library. It models a permanent magnet (PM) synchronous motor drive with a braking chopper for a 3HP motor.
The PM synchronous motor is fed by a PWM voltage source inverter, which is built using a Universal Bridge Block. The speed control loop uses a PI regulator to produce the flux and torque references for the vector control block. The vector control block computes the three reference motor line currents corresponding to the flux and torque references and then feeds the motor with these currents using a three-phase current regulator.
-This circuit uses the AC6 block of SimPowerSystems™ library. It models a permanent magnet (PM) synchronous motor drive with a braking chopper for a 3HP motor.
The PM synchronous motor is fed by a PWM voltage source inverter, which is built using a Universal Bridge Block. The speed control loop uses a PI regulator to produce the flux and torque references for the vector control block. The vector control block computes the three reference motor line currents corresponding to the flux and torque references and then feeds the motor with these currents using a three-phase current regulator.
Platform: |
Size: 9216 |
Author: jurifa |
Hits:
Description: The induction motor is fed by a current-controlled PWM inverter which is built using a Universal Bridge block. The motor drives a mechanical load characterized by inertia J, friction coeficient B, and load torque TL . The speed control loop uses a proportional-integral controller to produce the quadrature-axis current reference iq* which controls the motor torque. The motor flux is controlled by the direct-axis current reference id*. Block DQ-ABC is used to convert id* and iq* into current references ia*, ib*, and ic* for the current regulator. Current and Voltage Measurement blocks provide signals for visualization purpose. Motor current, speed, and torque signals are available at the output of the Asynchronous Machine block.-The induction motor is fed by a current-controlled PWM inverter which is built using a Universal Bridge block. The motor drives a mechanical load characterized by inertia J, friction coeficient B, and load torque TL . The speed control loop uses a proportional-integral controller to produce the quadrature-axis current reference iq* which controls the motor torque. The motor flux is controlled by the direct-axis current reference id*. Block DQ-ABC is used to convert id* and iq* into current references ia*, ib*, and ic* for the current regulator. Current and Voltage Measurement blocks provide signals for visualization purpose. Motor current, speed, and torque signals are available at the output of the Asynchronous Machine block.
Platform: |
Size: 15360 |
Author: jurifa |
Hits:
Description: 单片机控制的电动自行车驱动系统，//电动车双闭环程序，采用双闭环方式控制电机，以得到最好的zh转速性能，并且可以
//限制电机的最大电流。本应用程序用到两个CCP部件，其中CCP1用于PWM输出，以控制电机电压；CCP2用于触发AD，定时器TMR2、TMR1，INT中断，RB口电平变化中断，看门狗以及6个通用I/O口-Single-chip control of the electric bicycle drive system,// electric cars double-loop procedure for the double-loop control of motor speed zh to get the best performance, and can// limit the maximum motor current. This application uses two CCP components, which CCP1 for PWM output to control motor voltage CCP2 trigger AD, timer TMR2, TMR1, INT interrupt, RB port change interrupt, watchdog, and 6 Universal I/O port
Platform: |
Size: 4096 |
Author: xiakangwei |
Hits:
Description: linux下S3C2440通用i/o口控制步进电机驱动，实现速度方向可调-S3C2440 under linux Universal i/o port controlled stepper motor driver, to achieve speed adjustable direction
Platform: |
Size: 1024 |
Author: 123 |
Hits:
Description: control pid motor universal pid
Platform: |
Size: 605184 |
Author: mourad |
Hits:
Description: 本设计利用通用红外遥控器控制小车后轮两个电机的动作来实现小车走、停、转弯等功能。并通过软件控制小车方向和PWM调速小车的转速。具体思想如下：通过外部中断1接收红外信息，并通过软件解码，根据接收信息的不同通过PWM和控制函数做出响应，并且在二极管上面反映出来，所以说二极管充当车灯和档位指示灯的作用，且每次接收信号，蜂鸣器鸣叫用来显示有信号的传入。-This design uses universal infrared remote control operation of the motor car rear wheels to achieve two car go, stop, turn and other functions.
Platform: |
Size: 365568 |
Author: 刘小锋 |
Hits:
Description: 里面全是一些电力电子与电机的基础通用通用模型，有些参数没有设置，需要根据需要自己设置。-Full of some of the power electronics and motor on the basis of general universal model, some parameters are not set, need according to your Settings.
Platform: |
Size: 391168 |
Author: 张小行 |
Hits:
Description: A 3-phase squirrel-cage motor is fed by a 3-phase MOSFET inverter connected to a DC voltage source . The inverter is modeled using the Universal Bridge block and the motor by the Asynchronous Machine block.-A 3-phase squirrel-cage motor is fed by a 3-phase MOSFET inverter connected to a DC voltage source . The inverter is modeled using the Universal Bridge block and the motor by the Asynchronous Machine block.
Platform: |
Size: 15360 |
Author: sihem |
Hits:
Description: This circuit uses the AC7 block of SimPowerSystems™ library. It models a brushless DC motor drive with a braking chopper for a 3HP motor.The permanent magnet synchronous motor (with trapezoidal back-EMF) is fed by a PWM voltage source inverter, which is built using a Universal Bridge Block. The speed control loop uses a PI regulator to produce the torque reference for the current control block. The current control block computes the three reference motor line currents, in phase with the back electromotive forces, corresponding to the torque reference and then feeds the motor with these currents using a three- phase current regulator.Motor current, speed, and torque signals are available at the output of the block.-This circuit uses the AC7 block of SimPowerSystems™ library. It models a brushless DC motor drive with a braking chopper for a 3HP motor.The permanent magnet synchronous motor (with trapezoidal back-EMF) is fed by a PWM voltage source inverter, which is built using a Universal Bridge Block. The speed control loop uses a PI regulator to produce the torque reference for the current control block. The current control block computes the three reference motor line currents, in phase with the back electromotive forces, corresponding to the torque reference and then feeds the motor with these currents using a three- phase current regulator.Motor current, speed, and torque signals are available at the output of the block.
Platform: |
Size: 20480 |
Author: Gwynble1dd |
Hits:
Description: 根据单相永磁同步电动机数学模型，利用MATLAB提供的Simulink仿真工具构造了单相永磁同步电动机的通用仿真模型，并设计了友好的人机交互界面，通过仿真实验验证了模型的正确性。-According to the mathematical model of single- phase permanent magnet synchronous motor, the universal simulation model of single- phase permanent magnet synchronous motor is constructed by Simulink simulation tool provided by MATLAB. The friendly human- computer interaction interface is designed and the correctness of the model is verified by simulation experiment.
Platform: |
Size: 11264 |
Author: 戈小中 |
Hits:
Description: This is circuit for embedded software.
Platform: |
Size: 96256 |
Author: tarzan110
|
Hits:
Description: 对音圈电机进行PID控制，具有通用性，包含窗口界面(The PID control of the voice coil motor is universal, including window interface)
Platform: |
Size: 2789376 |
Author: 程序小白菜
|
Hits: