Location:
Search - avr lock
Search list
Description: his project was built and tested with WinAVR-20060125.
Make sure the MCU target define in the Makefiles corresponds to the AVR you are using!!
To build the code, just install WinAVR and run \"make\" from the console in echomaster and
echoslave subdirs.
\"make program\" will program the device if you have a AVRISP attached.
Remember to set the AVR device to at least 8MHz. The AVR may use the programmable clock
from MC1319x, just remember to check if the MC1319x and SPI communication is working FIRST!
Otherwise you wont get any clock signal to the AVR and then you can t program it or reset
the fuses!
The MC1319x has default clock output of 32kHz so you will have to set your programmer to
a very low frequency (<=32kHz/4) to be able to program it while it is running on that!-his project was built and tested with WinAV R-20060125. Make sure the MCU target define in t he Makefiles corresponds to the AVR you are usin g! ! To build the code, WinAVR just install and run "make" from the cons Morning in echomaster and echoslave subdirs. "make program "will program the device if you have a AV RISP attached. Remember to set the device to AVR at least 8MHz. The AVR may use the programmable c lock from MC1319x. just remember to check if the MC1319x and SPI com munication is working FIRST! Otherwise you will t get any clock signal to the AVR and then you can not program it or reset the fuses! The MC1319x has de fault clock output of 32kHz so you will have to se not your programmer to a very low frequency (
Platform: |
Size: 25207 |
Author: chezhen |
Hits:
Description: his project was built and tested with WinAVR-20060125.
Make sure the MCU target define in the Makefiles corresponds to the AVR you are using!!
To build the code, just install WinAVR and run "make" from the console in echomaster and
echoslave subdirs.
"make program" will program the device if you have a AVRISP attached.
Remember to set the AVR device to at least 8MHz. The AVR may use the programmable clock
from MC1319x, just remember to check if the MC1319x and SPI communication is working FIRST!
Otherwise you wont get any clock signal to the AVR and then you can t program it or reset
the fuses!
The MC1319x has default clock output of 32kHz so you will have to set your programmer to
a very low frequency (<=32kHz/4) to be able to program it while it is running on that!-his project was built and tested with WinAV R-20060125. Make sure the MCU target define in t he Makefiles corresponds to the AVR you are usin g! ! To build the code, WinAVR just install and run "make" from the cons Morning in echomaster and echoslave subdirs. "make program "will program the device if you have a AV RISP attached. Remember to set the device to AVR at least 8MHz. The AVR may use the programmable c lock from MC1319x. just remember to check if the MC1319x and SPI com munication is working FIRST! Otherwise you will t get any clock signal to the AVR and then you can not program it or reset the fuses! The MC1319x has de fault clock output of 32kHz so you will have to se not your programmer to a very low frequency (
Platform: |
Size: 24576 |
Author: chezhen |
Hits:
Description: eeprom 24c64 by avr.
c source code
Platform: |
Size: 3072 |
Author: gm |
Hits:
Description: Combination Lock, code written in BASCOM-AVR Basic AVR Compiler, Proteus simulation included.
Platform: |
Size: 22528 |
Author: Rezax |
Hits:
Description: an electronic lock by AVR
Platform: |
Size: 3072 |
Author: ahmad |
Hits:
Description: Hello guys,
I ve built this GSM security system as my semester project using T290i mobile and controlled my car using it. Please leave your comments about it.
If any one needs help in implementing such a system, I can help.
Some of the functions it can perform are:
* start and stop the engine (without using the key)
* stop the engine if somebody starts it with a key ( by cutting off ignition)
* lock and unlock the doors
* send a text message to the owner if an intruder is detected (by monitoring the doors)
* switch the heater/air conditioner on and off
Platform: |
Size: 1984512 |
Author: Asif |
Hits:
Description: 一个avr proteus仿真的电子密码锁的实例，供学者学习。-1 avr proteus simulation examples of the electronic lock for scholars to learn.
Platform: |
Size: 195584 |
Author: 陈叶飞 |
Hits:
Description: E-lock project with AVR ATMEGA8 and Bascom language - get 3 password in EEPROM and then with input currect pass set relay
Platform: |
Size: 22528 |
Author: Ali |
Hits:
Description: 本程序是基于AVR的指纹锁，指纹模块是FPM10A，液晶显示是12864.-This procedure is based on the AVR' s fingerprint lock, fingerprint module is FPM10A, liquid crystal display is 12864.
Platform: |
Size: 1087488 |
Author: 任超 |
Hits:
Description: An academic project in Proteus ISIS simulation named Combi-lock is a combination lock circuit with an embedded C code for Atmega32 AVR.
Platform: |
Size: 96256 |
Author: mehrdadj |
Hits:
Description: 基于ATMega 16单片机的密码锁的设计，以avr单片机为核心，设计一款具有自动报警功能的电子密码锁。-Microcontroller Based ATMega 16 lock design to avr microcontroller core, with automatic alarm function to design a electronic lock.
Platform: |
Size: 1625088 |
Author: zenpging |
Hits:
Description: Simple AVR LOCK application which uses eeprom-Simple AVR LOCK application which uses eeprom
Platform: |
Size: 32768 |
Author: wroobel |
Hits:
Description: BASCOM-AVR 数字密码锁，
含原理图-Digital Code Lock Project:
This is a simple Digital Code Lock project based on ATmega8 microcontroller and 16x2 LCD and a 4x4 keypad. This project run on AMC8 mini computer too. but you can design a different hardware for it.
Platform: |
Size: 89088 |
Author: lupo |
Hits:
Description: bascom-avr专业AVR密码锁项目：
该项目是提高AVR的数字密码锁的版本。在这个项目中，你可以改变从系统菜单中的8位数字的密码。也有一个经理的控制面板，一个4位数的PIN码保护，以保护其他人访问这个安全区。这个PIN码是与控制面板多变。这个版本的另一个优势是一个定时的安全级别，当你进入一个不正确的密码3次，系统将约5分钟待机！所有的密码保存在EEPROM存储器。最新的功能真的是changeabe输出 触发器或定时从1到255秒。-Professional AVR Code Lock Project:
This project is improved version of Digital AVR Code Lock. in this project you can change 8 digit password from system menus. also there are a manager control panel that protect with a 4 digit pin code to preserve other people access to this security zone. this pin code is changeable with control panel too. another advantage of this version is a timed security level when you enter a incorrect password for 3 time the system will be standby for about 5 minute! all password saved on EEPROM memory. latest feature is changeabe realy output flip flop or timed from 1 to 255 second.
Platform: |
Size: 107520 |
Author: lupo |
Hits:
Description: CodeLockAVR electronic combination lock is realised with
Atmel AVR microcontroller AT90S2313. Program in hex code is
2 kB long. User code is consisted of 1 to 4 digits.
If the code is entered in the correct sequence, then after 1 second
the relay and the electric striker (in the door) switch on for 1
second and then switch off again.
User code can be changed via 3x4 matrix keypad. Keypad can be
bought at local electronic shop.
Initial user code (1234) is set up with a jumper. The jumper must
be inserted before the voltage (12V) connection. The jumper must
be removed after 2 beeps.
Platform: |
Size: 355328 |
Author: fox |
Hits:
Description: Atmega8 based 8 digit combination lock Code source file in Bascom
Platform: |
Size: 98304 |
Author: SaveChanges |
Hits:
Description: Source code Door Lock security with CodeVision AVR and proteus simulator
Platform: |
Size: 240640 |
Author: masterxxx |
Hits:
Description: Doorlock keypad program that can be uploaded to avr microprocessor
Platform: |
Size: 2048 |
Author: Hussein |
Hits:
Description: 利用常用的AVR单片机ATmega16制作的高压解锁器，可以解开所有芯片锁死的情况（除非芯片损坏、烧毁）-High pressure release produced by the commonly used AVR microcontroller ATmega16, all the chips can unlock the lock case (unless the chip is damaged, destroyed)
Platform: |
Size: 478208 |
Author: 詹生 |
Hits:
Description: At-mega8 based Access Control
Platform: |
Size: 10240 |
Author: SHIL |
Hits: