Location:
Search - avr spi t
Search list
Description: his project was built and tested with WinAVR-20060125.
Make sure the MCU target define in the Makefiles corresponds to the AVR you are using!!
To build the code, just install WinAVR and run \"make\" from the console in echomaster and
echoslave subdirs.
\"make program\" will program the device if you have a AVRISP attached.
Remember to set the AVR device to at least 8MHz. The AVR may use the programmable clock
from MC1319x, just remember to check if the MC1319x and SPI communication is working FIRST!
Otherwise you wont get any clock signal to the AVR and then you can t program it or reset
the fuses!
The MC1319x has default clock output of 32kHz so you will have to set your programmer to
a very low frequency (<=32kHz/4) to be able to program it while it is running on that!-his project was built and tested with WinAV R-20060125. Make sure the MCU target define in t he Makefiles corresponds to the AVR you are usin g! ! To build the code, WinAVR just install and run "make" from the cons Morning in echomaster and echoslave subdirs. "make program "will program the device if you have a AV RISP attached. Remember to set the device to AVR at least 8MHz. The AVR may use the programmable c lock from MC1319x. just remember to check if the MC1319x and SPI com munication is working FIRST! Otherwise you will t get any clock signal to the AVR and then you can not program it or reset the fuses! The MC1319x has de fault clock output of 32kHz so you will have to se not your programmer to a very low frequency (
Platform: |
Size: 25207 |
Author: chezhen |
Hits:
Description: avr的程序，spi通信的程序，还有好多其他的-avr procedures, 20 communications procedures, there is still much to the other
Platform: |
Size: 709632 |
Author: huhc |
Hits:
Description: his project was built and tested with WinAVR-20060125.
Make sure the MCU target define in the Makefiles corresponds to the AVR you are using!!
To build the code, just install WinAVR and run "make" from the console in echomaster and
echoslave subdirs.
"make program" will program the device if you have a AVRISP attached.
Remember to set the AVR device to at least 8MHz. The AVR may use the programmable clock
from MC1319x, just remember to check if the MC1319x and SPI communication is working FIRST!
Otherwise you wont get any clock signal to the AVR and then you can t program it or reset
the fuses!
The MC1319x has default clock output of 32kHz so you will have to set your programmer to
a very low frequency (<=32kHz/4) to be able to program it while it is running on that!-his project was built and tested with WinAV R-20060125. Make sure the MCU target define in t he Makefiles corresponds to the AVR you are usin g! ! To build the code, WinAVR just install and run "make" from the cons Morning in echomaster and echoslave subdirs. "make program "will program the device if you have a AV RISP attached. Remember to set the device to AVR at least 8MHz. The AVR may use the programmable c lock from MC1319x. just remember to check if the MC1319x and SPI com munication is working FIRST! Otherwise you will t get any clock signal to the AVR and then you can not program it or reset the fuses! The MC1319x has de fault clock output of 32kHz so you will have to se not your programmer to a very low frequency (
Platform: |
Size: 24576 |
Author: chezhen |
Hits:
Description: 由AVR系列单片机的SPI口实现的TFT彩色液晶显示功能-By the AVR MCU SPI I implementation of the TFT color LCD display
Platform: |
Size: 4383744 |
Author: 闻宇洲 |
Hits:
Description: Mega16读12位AD芯片TLC2543（硬件SPI传输）
TLC2543驱动，将读到的ADC数据通过串口发送到 PC-Mega16 (external 7.37628M)+ TLC2543
TLC2543 driver will read the ADC data is sent to the PC through the serial port
Platform: |
Size: 10240 |
Author: 张帅 |
Hits:
Description: For this project you need a 3.7v power supply that prepared by LM317 regulator. So you need MAX232 for connect uart to pc .my AVR chip project is Mega8 that you can program on any Avr chip have 2kbyte rom. In bascom spi hardware don’t work correct, so I have to software spi ,but the software spi configure have low speed into hardware spi.
Platform: |
Size: 17408 |
Author: Mohammad |
Hits: