Description: 用89C52制作太阳电池数显充放电控制器原程序.说明：70H内存单元存放采样值，78H-7AH存放显示的BCD码数据；自然就依次为个位、十位和百位，模数转换器是ADC0809-89C52 production of solar cells with a number of significant charge-discharge controller original procedures. Description: 70H memory unit storing sampled values, 78H-7AH store display BCD code data naturally followed by a bit, 10 and 100, ADC is the ADC0809 Platform: |
Size: 2048 |
Author:韩小健 |
Hits:
Description: 本系统基于反馈控制思想，由交直流转换电路、DC-DC变换器、步进电路模块和显示模块4个模块电路构成开关稳压电源。交直流转换电路整流部分采用全波桥式整流电路形式，DC-DC变换器以TL494有主核心设计并加上简单滤波电路及RC放电回路所构成的回路控制器。它能把脉冲宽度变化的信号转换成与脉冲宽度成正比变化的直流信号，进而实现闭环单回路控制。由单片机控制
数字定位器X9241的电阻,进而控制输出电压。显示模块由LCD1602构成。
-Based on feedback control of the system of thought, from AC-DC converter circuit, DC-DC converters, stepper circuit module and display module 4 module circuit switching power supply. AC-DC converter circuit using full-wave rectifier part of the circuit form of bridge rectifier, DC-DC converter to TL494 have the main core of the design and add a simple RC filter circuit and discharge circuit posed by the loop controller. It can change the pulse width signals into changes with the pulse width is proportional to the DC signal, and thus realize the closed-loop single-loop control. By the single-chip microcomputer to control the number of locator X9241 resistance, thereby control the output voltage. LCD1602 constituted by the display module. Platform: |
Size: 52224 |
Author:苏永生 |
Hits:
Description: 本系统基于反馈控制思想，由交直流转换电路、DC-DC变换器、步进电路模块和显示模块4个模块电路构成开关稳压电源。交直流转换电路整流部分采用全波桥式整流电路形式，DC-DC变换器以TL494有主核心设计并加上简单滤波电路及RC放电回路所构成的回路控制器。它能把脉冲宽度变化的信号转换成与脉冲宽度成正比变化的直流信号，进而实现闭环单回路控制。由单片机控制
数字定位器X9241的电阻,进而控制输出电压。显示模块由LCD1602构成。
-Based on feedback control of the system of thought, from AC-DC converter circuit, DC-DC converters, stepper circuit module and display module 4 module circuit switching power supply. AC-DC converter circuit using full-wave rectifier part of the circuit form of bridge rectifier, DC-DC converter to TL494 have the main core of the design and add a simple RC filter circuit and discharge circuit posed by the loop controller. It can change the pulse width signals into changes with the pulse width is proportional to the DC signal, and thus realize the closed-loop single-loop control. By the single-chip microcomputer to control the number of locator X9241 resistance, thereby control the output voltage. LCD1602 constituted by the display module. Platform: |
Size: 50176 |
Author:苏永生 |
Hits:
Description: 采用lpc935控制的太阳能控制器，主要功能为白天自动充电、晚上自动放电，有蓄电池过压、欠压保护等功能。-Lpc935 control the use of solar energy controller, the main function for the automatic recharge during the day, evening automatic discharge, the battery has over-voltage, under voltage protection. Platform: |
Size: 50176 |
Author:章非 |
Hits:
Description: 可通航水库闸门简易控制系统概述：水库闸门具有如下四重功能，控制蓄水、及时泄洪、控制通航、保证发电。故一个功能完善的水库系统应有实现发电控制（发电闸门，设为一组）、泄洪或供水需要（泄洪供水闸门，设为一组）及维护通航（通航闸门，上下游各一组）等三种功能的闸门系统。本课题拟设计一水库闸门控制系统，通过组合电路与时序电路共同实现一闸门开关控制器，在试验阶段用LED指示灯亮灭来模拟闸门开关-Navigable dam gate control system outlined in the Summary: Reservoir gates have the following four functions to control the storage and timely discharge, control navigation, to ensure power generation. It is a function of the reservoir system should be improved to achieve power control (power gate, as a group), the need for flood or water (flood water gate, as a group) and the maintenance of navigation (navigation gate, a group of the upstream and downstream ), three features of the gate system. Subject to the design of the gate control system of a reservoir, through the combination of circuit and sequential circuit realization of a common gate switch controller, the pilot phase out with bright LED lights to simulate the gate switch Platform: |
Size: 20480 |
Author:ayls |
Hits:
Description: 本人用STC12LE5202AD做过的太阳能草坪灯LED充放电控制器，具有浮充，过充，过放，光控+时控等功能，
实际应用良好，希望大家多多指导。-I am done with STC12LE5202AD solar lawn lamp LED charge and discharge controller, with a float, over charge, over discharge, light control+ time control and other functions, the practical application of good, I hope you lot of guidance. Platform: |
Size: 3072 |
Author:李星 |
Hits:
Description: 光伏控制器，自动充放电控制12V/10A光伏控制器（ERA-04-10-A）：
额定工作电压：DC12V
最大充电电流：10A
最大放电电流：5A/路（共两路负载）
太阳能组件开路电压：25V
空载电流：<15mA
温度补偿：-20Mv/°C
工作环境温度：-25°C～+50°C
使用海拔：<5500M
控制器尺寸（mm）:
光控电压（25°C）：<=3.3V
过放保护电压（25°C）：<10.8V
过放恢复电压（25°C）：>10.8V
过充保护电压（25°C）：>15.0V
过压保护电压：17.68V
过压恢复电压：14.7V
浮充电压（25°C）：13.4V～13.7V
恢复正常充电电压（25°C）：13.2V
结束正常充电电压（25°C）：15.0V
-PV controller, automatic charge and discharge control 12V/10A PV controller (ERA-04-10-A): Rated voltage: DC12V Maximum charge current: 10A Maximum discharge current: 5A/Road (a total of two loads) Solar components of the open circuit voltage: 25V No-load current: < 15mA Temperature Compensation:-20Mv/° C Operating Temperature:-25 ° C ~+50 ° C with elevation: < 5500M Controller Size (mm): light control voltage (25 ° C): < = 3.3V over-discharge protection voltage (25 ° C): < 10.8V over-discharge recovery voltage (25 ° C):> 10.8V overcharge protection voltage (25 ° C):> 15.0V over-voltage protection Voltage: 17.68V overvoltage recovery voltage: 14.7V float voltage (25 ° C): 13.4V ~ 13.7V back to normal charging voltage (25 ° C): 13.2V end of the normal charging voltage (25 ° C): 15.0V Platform: |
Size: 5120 |
Author:zhou |
Hits:
Description: 太阳能电池板控制器，通过感应阳光的不同，控制电池的充电与放电。-Solar panel controller, different from the sun through the induction and control the battery charge and discharge. Platform: |
Size: 1024 |
Author:段佳玉 |
Hits:
Description: 太阳能充电控制器程序，主要提供涓流，过充过放保护-The solar charge controller program, mainly to provide a trickle, overcharge and over discharge protection Platform: |
Size: 3072 |
Author:吕一博 |
Hits:
Description: 此图式经典太阳能充放电控制器的原理图，并且已经量产了，有过流，电压检测功能-This classic solar schematic diagram for charge and discharge controller, and has production, and there are over-current, voltage detection Platform: |
Size: 165888 |
Author:郭桂良 |
Hits:
Description: 本文设计了主电路参数并在MATLAB/Simuhnk环境下进行了仿真。本文还提
出了以MC9512D64为核心的双向DC/DC变换器控制板和控制器的硬件、软件的完
整的设计方案。充电采用恒流充电和恒压充电相结合的控制策略，实现单体电池
电压控制，提高了充放电控制性能和安全性。充放电系统样机测试结果表明:满
载时，系统效率80 以上，功率因数99 以上，谐波含量5 以下，满足设计要求，
验证了系统设计的可行性。
-The design parameters of the main circuit and in MATLAB/Simuhnk environment simulation. The paper also proposed to MC9512D64 core bidirectional DC/DC converter control panel and controller hardware and software design. Charging using the combination of constant current charge and constant voltage charge control strategy to achieve the control of cell voltage, and to improve the charge-discharge control performance and security. The charging and discharging system prototype test results show that: when fully loaded, the system efficiency is above 80 , more than 99 of the power factor, harmonic content below 5 , to meet the design requirements, verify the feasibility of the design of the system. Platform: |
Size: 7019520 |
Author:田文 |
Hits:
Description: 正確的充電和放電8個獨立的軟件使鎳鎘電池組。
為PIC16C74A微控制器與ADC和ROM/RAM-Software to Cause correct charging and discharge cycling of 8 seperate Nicd Battery Packs.
Designed for the PIC16C74A micro-controller with ADC and lots a ROM/RAM Platform: |
Size: 10240 |
Author:chan |
Hits:
Description: 本文介绍了一种基于单片机的太阳能控制器，系统使用低功耗、高性能的AT89S51单片机作为控制电路的核心器件。此系统由太阳能电池模块，蓄电池，充放电电路，电压采集电路，单片机控制电路和光耦驱动电路组成。设计使用PWM（脉宽调制）控制技术来控制蓄电池充放电，通过控制MOSFET管开启和关闭达到控制电池充放电的目的。实验结果表明，该控制器性能可靠，可以监视太阳能电池和蓄电池电池状态，实现控制蓄电池最优充放电，达到延长蓄电池的使用寿命。-This paper introduces a solar controller based on MCU, AT89S51 chip with low power consumption, high performance of the system as the core device control circuit. This system consists of solar battery module, battery, charging and discharging circuit, voltage acquisition circuit, SCM control circuit and optocoupler drive circuit. Design using PWM (pulse width modulation) control technology to control the battery charge and discharge, by controlling the MOSFET tube open and closed to control the battery charge and discharge of the objective. The experimental results show that, the controller performance is reliable, can monitor the solar cell and battery state of charge and discharge the battery, to achieve optimal control, to prolong the service life of the battery. Platform: |
Size: 522240 |
Author:阿娇 |
Hits:
Description: 太阳能控编程源码制器，包括过充过放保护电路的编程，以及跟随太阳转动角度的编程-Solar control system device programming source, including over-charge and over-discharge protection circuit programming, as well as to follow the rotational angle of the sun programming Platform: |
Size: 7168 |
Author:孟德磊 |
Hits:
Description: The fuzzy logic control based battery management system has been designed for effective power utilization. The proposed control to operate the battery charging and discharging mode during non-linear power generation. The battery will charge whenever the renewable energy power is greater than to consumer load power as well as the battery will discharge whenever the renewable energy power is lesser than to consumer load power. The proposed model will be simulated using Matlab environment and analysis the proposed system results. Finally, simulation results are uated and validating the effectiveness of the proposed controller.- The fuzzy logic control based battery management system has been designed for effective power utilization. The proposed control to operate the battery charging and discharging mode during non-linear power generation. The battery will charge whenever the renewable energy power is greater than to consumer load power as well as the battery will discharge whenever the renewable energy power is lesser than to consumer load power. The proposed model will be simulated using Matlab environment and analysis the proposed system results. Finally, simulation results are uated and validating the effectiveness of the proposed controller. Platform: |
Size: 356352 |
Author:ala |
Hits:
Description: 该文档详细的讲述了LCL滤波应用于蓄电池充放电的控制，并利用自控原理进行了控制器参数的矫正。-The document describes in detail the application of LCL filtering in the battery charge and discharge control, and the use of automatic control principle of the controller parameters. Platform: |
Size: 468992 |
Author:杜杜 |
Hits:
Search - discharge controller