Description: ModBus是工业上的通用型通讯协议，目前ModBus可以支持RS232的串口通讯，也可以支持Ethernet以太网通讯，一般的工业设备上都支持有ModBus通讯协议
附件是ModBus Ethernet的TCP方式的通讯例程，仅供参考-ModBus is a general-purpose industrial communication protocols, the current ModBus support RS232 serial communications, Ethernet can also support Ethernet communications, general industrial equipment, both to support the ModBus communication protocol ModBus Ethernet attachment is the way the TCP communications Example way, for reference only Platform: |
Size: 72704 |
Author:张军 |
Hits:
Description: RS232串口与SOCKET通信转换程序，将串口消息和以太网SOCKET消息互相转换。-RS232 serial communication with the SOCKET conversion process, news and Ethernet to serial with each other conversion SOCKET news. Platform: |
Size: 55296 |
Author:贾晓军 |
Hits:
Description: 目前在工业控制领域,单片机系统主要通过RS232、RS485和CAN总线协议通信,它们无法直接与互联网连接,因此该系统处于与互联网隔绝的状态。这些系统广泛采用低成本8位单片机,而这种单片机一般只具有RS232异步串行通信接口,要接入到互联网必须进行通信接口改造,这种改造不仅是接口的物理改造,更关键是数据格式的改造和通信协议的转换。本文提出一种RS232串行通信接口与RJ45以太网接口转换器的设计方案,已有的单片机系统可以通过该转换器接入到以太网,进一步接入互联网。-Currently in the field of industrial control, single-chip microcomputer system mainly through RS232, RS485 and CAN bus protocol communications, they can not be directly connected to the Internet, so the system is in a state of isolation and the Internet. These systems are widely used in low-cost 8-bit MCU, which generally has a single-chip RS232 asynchronous serial communication interface, to access to the Internet must be communication interface transformation, such transformation is not only the physical interface transformation, more crucial is the transformation of data format and communication protocol conversion. In this paper, a RS232 serial communication interface with RJ45 Ethernet interface converter design, the existing single-chip microcomputer system via the access to Ethernet converter, and further access to the Internet. Platform: |
Size: 1908736 |
Author:郑宏超 |
Hits:
Description: “任何设备皆可上以太网”，S-ET是最简单、智能的转换器，可轻松地将只有RS232/422/485的设备连到TCP/IP网络中。通过简单的增加一个S-ET转换器马上就可连接以太网，得以获取高集成都的设备服务。有了S-ET，CNCs、电表、冰水盘、火警盘、读卡器、PLC、传感器、UPS等设备将成为以太网上的强有力工具。-" Any equipment can be on Ethernet" , S-ET is the most simple, intelligent switches, can easily be only RS232/422/485 devices connected to TCP/IP network. Through simple addition of a S-ET converter can immediately connect Ethernet, to obtain both a high level of integration of equipment services. With the S-ET, CNCs, electricity meters, ice plates, fire plate, reader, PLC, sensors, UPS and other devices will become a powerful tool for Ethernet. Platform: |
Size: 583680 |
Author:sjm |
Hits:
Description: 51串口程序，希望对大家有帮助，RS232经典程序！-51 serial procedures, in the hope that everyone has to help, RS232 classic program! Platform: |
Size: 140288 |
Author:章程 |
Hits:
Description: RS232异步串行接口转以太网接口C语言程序源码-RS232 asynchronous serial interface to Ethernet interface C language source program Platform: |
Size: 146432 |
Author:ys |
Hits:
Description: 本文提出并研究设计了一个基于ARM和uC/OS一11的自动气象站实时多任务数据采集系统，完成了系统的硬件和软件设计。该系统以犯位高性能ARM微处理器S3C44BOX为硬件核心，扩展了10/100M以太网接口、USB2.0接口、RS232串口以及DE接口等通用接口 以嵌入式实时操系统uC/OS-II为软件平台，在ARMSDT.251环境下进行系统软件的开发。该系统充分利用了ARM微处理器高性能、低功耗、低成本的优势，发挥了uC/OS-II可移植性好、开发成本低的点，为自动气象站的数据采集提供了一个经济实用的解决方案。-In this paper, and designed a study based on the ARM and uC/OS-11 automatic weather station data acquisition in real-time multi-tasking system, the completion of the system' s hardware and software design. The system is committed S3C44BOX bit microprocessor for high-performance ARM core hardware to expand the 10/100M Ethernet interface, USB2.0 interface, RS232 serial port as well as the common interface, such as DE interface to embedded real-time systems Cao uC/OS-II for the software platform, ARMSDT.251 environment in the software development system. The system makes full use of high-performance ARM microprocessor, low power, low-cost advantages, has played a uC/OS-II portability, and the development of low-cost point for the automatic weather station data collection provides an economic practical solutions. Platform: |
Size: 2037760 |
Author:wangye |
Hits:
Description: 为调试设备编写的RS232转以太网通信软件。
均使用异步通信方式，RS232使用API编写，以太网使用Sockte类。程序中使用了两个独立线程，线程间以消息方式传递数据，本程序中包括：RS232异步通信、Sockte异步通信、用户界面线程、线程间通信。-Equipment prepared for debugging RS232 to Ethernet communications software. Only use asynchronous communication mode, RS232 using the API written in Ethernet using Sockte class. The program uses two separate threads, the threads in the message is transmitted data, this program includes: RS232 asynchronous communication, Sockte asynchronous communication, the user interface thread, communication between threads. Platform: |
Size: 21642240 |
Author:Huangxiangjun |
Hits:
Description: 基于DSP6000的NDK库文件，
\NETWORK - Network oriented examples (requires Ethernet)
\SERIAL - Serial port based examples (requires serial port for
all examples, plus Ethernet for serial/Ethernet bridge)
\TOOLS - Common tools (test code, servers, etc) used in all examples-Based on DSP6000' s NDK library, \ NETWORK- Network oriented examples (requires Ethernet) \ SERIAL- Serial port based examples (requires serial port for all examples, plus Ethernet for serial/Ethernet bridge) \ TOOLS- Common tools (test code, servers , etc) used in all examples Platform: |
Size: 6370304 |
Author:dick |
Hits:
Description: 该文件是“通讯系统”的电路图实例，本电路图注重于USB2.0、RS232、以太网的连接方法以及外围电路设计，为读者朋友提供一个完整的电路实例。而C6713电路部分，只涉及C6713与三个器件的连接关系，至于C6713的其他部分（如SDRAM、FLASH等）都略去,读者可参考另外相关的章节。-The document is " communication system" circuit instance, the diagram focuses on USB2.0, RS232, Ethernet connection method and the external circuit design, the reader will provide an example of a complete circuit. The C6713 circuit part, only involves the C6713 and the connection of the three devices, as in other parts of C6713 (such as SDRAM, FLASH, etc.) are omitted, the reader may refer to other relevant chapters. Platform: |
Size: 74752 |
Author:小胖 |
Hits:
Description: Lpc 2378-88 mini pc - /mmc-sd/usb a,b/10-20mbit Ethernet/i2c display/ up to 36 v dc-dc/rs232/jtag/ etc/ + molex 80 pin conector/for sim 508/548
ang you have lpc2378 mini pc + gsm +gps
I do hope its very interest information for community /
thanx-Lpc 2378-88 mini pc - /mmc-sd/usb a,b/10-20mbit Ethernet/i2c display/ up to 36 v dc-dc/rs232/jtag/ etc/ + molex 80 pin conector/for sim 508/548
ang you have lpc2378 mini pc + gsm +gps
I do hope its very interest information for community /
thanx Platform: |
Size: 2030592 |
Author:Oleg |
Hits:
Description: 基于DSP的语音通信系统，含全部源码和完整电路图。本电路图注重于USB2.0、RS232、以太网的连接方法以及外围电路设计，为读者提供一个完整的电路实例。而C6713电路部分，只涉及C6713与三个器件的连接关系，至于C6713的其他部分（如SDRAM、FLASH等）都略去,读者可参考另外相关的章节。-DSP-based voice communications system, complete with all source code and schematics. The diagram focuses on USB2.0, RS232, Ethernet connection method and the external circuit design, providing readers with a complete circuit instance. The C6713 circuit, only involves the C6713 and the connection of three components, as in other parts of C6713 (for example, SDRAM, FLASH, etc.) are omitted, the reader may refer to other relevant chapters. Platform: |
Size: 91136 |
Author:SkySeraph |
Hits:
Description: Development set EVM9200, based on AT91RM9200 from Atmel Corporation contain popular interfaces Ethernet 100/10, RS232, USB device, USB host, MultimediaCard, and can be useful for embedded systems developers. Development set EVM9200m, EVM9200m analog, buffered external data bus is available for order as physical samples and as via PCB files. Developmet set EVM9200b EVM9200m analog without PHY Externet, MII interface conected to external connector is available for order via PCB files.
Project from www.ucrouter.com Platform: |
Size: 889856 |
Author:vdpr2 |
Hits:
Description: 介绍工业串口液晶显示触摸屏与人机界面组态软件HMImaker的开发指南，工业液晶显示触摸屏是一种包含TFT LCD显示屏、LCD控制器、触摸屏、人机界面组态软件系统和单片机TTL电平串口，RS232，RS485，以太网等通讯接口于一体的嵌入式智能显示终端。工业串口液晶显示触摸屏技术开发是基于嵌入式控制系统采用FPGA纯硬件驱动显示，无任何操作系统，零启动时间，上电即刻运行，速度和可靠性领先于其他方案。系统配套自主研发设计的，具有知识产权保护的人机界面组态软件HMImaker设计界面，可“所见即所得”、“0”代码快速生成炫酷图形界面，让开发嵌入式图形界面，如“制作PPT”一样简单、快速！支持各种通讯协议，比如单片机协议，modbus协议，西门子PLC协议，三菱PLC协议，台达PLC通讯协议等，支持各种组态控件，关联通讯变量地址即可与下位机通信，10分钟内完成人机界面设计。-Introduction industrial serial LCD guide the development of touch screen and man-machine interface configuration software HMImaker, industrial LCD touch screen is one kind contains the TFT LCD screen, LCD controller, touch screen, man-machine interface configuration software system and single-chip serial TTL level, RS232, RS485, embedded intelligent Ethernet communication interface display terminal. Industrial serial LCD touch screen technology development is embedded control system adopts FPGA display based on pure hardware drivers, without any operating system, zero start-up time, power on immediate operation, the speed and reliability of ahead of the other scheme. System supporting the independent research and development design, with the protection of intellectual property rights of the HMI configuration software HMImaker to design the interface, can be WYSIWYG , 0 code generated rapidly cool graphical interface, make the development of embedded graphical user interface, such as Platform: |
Size: 25436160 |
Author:陈秋荣 |
Hits:
Description: LPC4357开发板采用ARM的Cortex-M4微控制器LPC4357。内置一个ARM Cortex-M0协处理，CPU运行频率高达204MHz，片内集成1MB Flash和36KB SRAM。开发板采用独立核心板设计，核心板集成64MB SDRAM、128MB NAND-Flash、4MB SPI-Flash。核心板上的摄像头接口可直接连接各种型号的摄像头，两侧160P排针接口引出了除EMC总线外的LPC4357芯片所有功能管脚。
开发板提供丰富的外设接口，包括以太网、液晶屏、摄像头、USB-Host、USB-OTG、SD卡、RS232、RS485、CAN、耳机、麦克风、温度传感器、AD/DA、JTAG仿真器等。此外，开发板提供一个14P扩展接口，包括1路UART、1路SPI、1路I2C、4个IO、3.3V、5V，可以很方便的扩展自己的外围电路。-DS-LPC4357 development board using the Cortex-M4 microcontroller LPC4357 ARM s. A built-in ARM Cortex-M0 co-processor, CPU operating frequency up to 204MHz, 1MB Flash and 136KB SRAM integrated on chip.
Development board using an independent core board design, the core board integrates 64MB SDRAM, 128MB NAND-Flash, 4MB SPI-Flash. Camera core board interface can be directly connected to various types of cameras, both sides 160P pin interface leads to the outside of the bus in addition to EMC LPC4357 chip all the functions of the pins.
Development board provides a rich set of peripheral interfaces, including Ethernet, LCD screen, camera, USB-Host, USB-OTG, SD card, RS232, RS485, CAN, headphone, microphone, temperature sensor, AD/DA, JTAG emulator, etc. . In addition, the development board provides a 14P expansion interfaces, including one-way UART, 1 road SPI, 1 channel I2C, 4 个 IO, 3.3V, 5V, can easily expand their peripheral circuits. Platform: |
Size: 2249728 |
Author:GREENLANDL |
Hits:
Description: 实现RS232串口转以太网以及以太网到串口转换功能(Implementation of RS232 serial port to Ethernet and Ethernet to serial port conversion function) Platform: |
Size: 5093376 |
Author:huihuisummer
|
Hits:
Search - ethernet to RS232