Location:
Search - flash boot
Search list
Description: 合众达5502 Flash boot代码合众达5502 Flash boot代码合众达5502 Flash boot代码
Platform: |
Size: 170337 |
Author: jtx1900 |
Hits:
Description: boot flash的空闲部分作为文件系统（vxworks tffs)--Use the idle time of boot flash as file system (vxworks tffs).
Platform: |
Size: 10240 |
Author: 风风 |
Hits:
Description: 1）通过fs44b0xbios和网口，将upload里的boot.bin烧写到flash 0 地址
见“FS44B0Xbios使用指南”之5
2) 打开57600超级终端
3) 连上串口线和jtag调试头
4）打开FS44B0X开发板电源
5）运行jtag.exe,在SDT下调入 ucosii_demo.axf，运行
6) 在超级终端上有三个任务的运行与退出显示，板子上的三个发光二极管会来回闪烁。
-a) fs44b0xbios and LAN, li will upload the burning of flash boot.bin 0 addresses see "FS44B0Xbio s User's Guide "5 2) to open 57,600 Super Terminal 3) connected to serial lines and the first four JTAG Debugging) Open FS44B0X development board Power 5) Run jtag.exe, under the redeployment ucosii_demo.axf SDT, running 6) of the Super Terminal 3 on the mandate of the operation and withdraw from the show, on board the three light-emitting diodes will flicker back and forth.
Platform: |
Size: 215040 |
Author: 张淼林 |
Hits:
Description: 一个C54XX的FLASH烧写程序（将网友的8位烧写方式修改为16位方式，并实现.DAT文件加载），可以实C5410等系列DSP的BOOTLOAD功能。-C54XX FLASH a burning process (will netizens burning eight to modify 16, and to achieve. DAT document loading), it is C5410 DSP series of BOOTLOAD function.
Platform: |
Size: 16384 |
Author: |
Hits:
Description: TI C5410烧写Flash实现并行自举引导,绝对实例教程-burning parallel Flash Boot absolutely examples Guide
Platform: |
Size: 5120 |
Author: cuizhid |
Hits:
Description: 调试通过的可以直接在NAND Flash 上启动的u-boot-1.1.6 (开发板：优龙st2410) 包括：cs8900网卡驱动，NAND Flash 烧写，NAND 环境变量保存（saveenv）, bootm, go, 网络下载tftpboot-debugging can be passed directly on the NAND Flash to initiate the u-boot-1.1.6 ( Plate : You Lung st2410) : cs8900 card driven, NAND Flash burning, NAND preserve the environment variables (saveenv), bootm, go, Download tftpboot network
Platform: |
Size: 9320448 |
Author: |
Hits:
Description: 第一版YL2410开发板的BIOS
功能比较简单，上电之后，LCD显示蓝色、绿色、红色三个竖条
同时串口显示如下：
Power on reset
************************************
* *
* YL2410 Board BIOS V2006 *
* Http://www.ucdragon.com *
* *
************************************
NAND Flash Boot
Please select function :
0 : USB download file（通过USB下载文件）
1 : Uart download file（通过串口下载文件）
2 : Write Nand flash with download file（将下载的文件烧写到NandFlash）
3 : Load Pragram from Nand flash and run（从NandFlash装载文件并运行）
4 : Erase Nand flash regions（擦除NandFlash区域）
5 : Write NOR flash with download file（将下载的文件烧写到NorFlash）
6 : Set boot params（设置Linux启动相关参数）
7 : Set AutoBoot parameter,1:linux 2:wince(设置WINCE自启动）
-Commentator YL2410 development board BIOS functions are relatively simple, electricity, LCD blue, green, red and three vertical lines while serial is shown below : Power on reset***************************************************** YL2410 Board BIOS V2006** Http :// www.ucdragon.com************** Attention duty announcers NAND Flash Boot Please sele ct function : 0 : USB download file (through USB download) 1 : Uart download file (via serial port download) 2 : Write Nand flash with download file (download the burning of documents NandFlash) 3 : Load Pragram from Nand flash and run (from NandFlas h load and run) 4 : Erase Nand flash regions (erasure NandFlash regional) 5 : Write NOR flash with download file (download the document to the burning N orFlash) 6 : Set boot params (i
Platform: |
Size: 408576 |
Author: wind |
Hits:
Description: C6713对Flash 的烧写例程，对于做BOOT的人应该很有参考价值-Flash programmer for the C6713 routines for BOOT should make valuable
Platform: |
Size: 13312 |
Author: snowmancj |
Hits:
Description: (原创)uboot在yl2410上的移植，此u-boot代码在sdram、norflash或nandflash上都可启动运行，附详细说明文档-(Original) uboot in yl2410 the transplant, the u-boot code in the sdram, norflash or the NANDFLASH can start running on the attached detailed description of the document
Platform: |
Size: 6199296 |
Author: 阿里 |
Hits:
Description: TI dm6446 davinci nor flash boot file. include u-boot_nor.bin and nor flashwrite.out
Platform: |
Size: 136192 |
Author: 吴瑞玉 |
Hits:
Description: NAND Flash Boot
Please select function :
0 : USB download file（通过USB下载文件）
1 : Uart download file（通过串口下载文件）
2 : Write Nand flash with download file（将下载的文件烧写到NandFlash）
3 : Load Pragram from Nand flash and run（从NandFlash装载文件并运行）
4 : Erase Nand flash regions（擦除NandFlash区域）
5 : Write NOR flash with download file（将下载的文件烧写到NorFlash）
6 : Set boot params（设置Linux启动相关参数）
7 : Set AutoBoot parameter,1:linux 2:wince(设置WINCE自启动）-NAND Flash BootPlease select function: 0: USB download file (through the USB to download files) 1: Uart download file (through the serial port to download files) 2: Write Nand flash with download file (the downloaded file to the programmer NandFlash) 3: Load Pragram from Nand flash and run (from the NANDFLASH loading files and running) 4: Erase Nand flash regions (Erase the NANDFLASH region) 5: Write NOR flash with download file (the downloaded file to the programmer NorFlash) 6: Set boot params ( Linux set to start the relevant parameters) 7: Set AutoBoot parameter, 1: linux 2: wince (set up since the launch of WINCE)
Platform: |
Size: 409600 |
Author: yang |
Hits:
Description: TMS320F2812上电自动以串行方式将外部flash上的执行程序搬移到片内ram上的源码-TMS320F2812 power serial approach will automatically flash on the implementation of external procedures move to ram on-chip source
Platform: |
Size: 1724416 |
Author: 赵杰 |
Hits:
Description: nand flash 引导程序，值得-nand flash boot, it is worth
Platform: |
Size: 35840 |
Author: 白哈 |
Hits:
Description: 支持S3C24x0/yaffs/USB/CS8900/DM9000/OpenJTAG/Nor,Nand启动的u-boot
添加的功能：
1. 同时支持S3C2410和S3C2440
2. 支持串口xmodem协议
3. 支持USB下载，可以在PC上使用dnw传数据
4. 支持网卡芯片CS8900
5. 支持NAND Flash读写
6. 支持从Nor/Nand Flash启动
7. 支持烧写yaffs文件系统映象-Support S3C24x0/yaffs/USB/CS8900/DM9000/OpenJTAG/Nor, Nand start u-boot to add the functionality: 1. At the same time, support for S3C2410 and S3C24402. Support XMODEM Serial Protocol 3. To support the USB to download, you can use the PC on dnw Chuan-data 4. to support the network adapter chip CS89005. support for NAND Flash read and write 6. support from the Nor/Nand Flash boot 7. yaffs file system support programmer mapping
Platform: |
Size: 126976 |
Author: qin |
Hits:
Description: uboot1.3.0 for s3c2440, 支持nand flash启动-uboot1.3.0 for s3c2440, support nand flash boot
Platform: |
Size: 13666304 |
Author: wangqiang |
Hits:
Description: U-boot1.1.6 补丁，用于友善之臂QQs3c2440开发板支持nand flash,nor flash启动，直接patch到u-boot1.1.6中即可使用。-U-boot1.1.6 patch for the development friendliness of the arm QQs3c2440 board support nand flash, nor flash boot directly to the u-boot1.1.6 in the patch can be used.
Platform: |
Size: 126976 |
Author: feilong |
Hits:
Description: TMS320C6713的FLASH引导装载系统设计 ，给出了使用该FLASH存储器设计和实现完整的TMS320C6713 DSP引导装载系统的具体方法。-TMS320C6713 the FLASH boot loader system design, given the use of the FLASH memory design and implementation of a complete system of TMS320C6713 DSP boot loader specific methods.
Platform: |
Size: 200704 |
Author: 邹博安 |
Hits:
Description: blackfin533 芯片的并行flash加载驱动程序-blackfin533 parallel flash boot loader programe
Platform: |
Size: 3072 |
Author: fc |
Hits:
Description: 它是一个支持dm642烧写入flash程序的工具，支持seed dm642(It is a tool that supports DM642 burning and writing to flash programs and supports seed DM642)
Platform: |
Size: 197632 |
Author: yuem
|
Hits:
Description: 基于nandflash启动的DM6446 boot文件，需要的参考(DM6446 boot file based on nandflash startup, the reference required)
Platform: |
Size: 2939904 |
Author: gob
|
Hits:
« 12
3
4
5
6
7
8
9
10
...
19
»