Location:
Search - igbt rectifier
Search list
Description: 中频感应加热以其加热效率高、速度快，可控性好及易于实现机械化、自动化等优点，已在熔炼、铸造、弯管、热锻、焊接和表面热处理等行业得到广泛的应用。
本设计根据设计任务进行了方案设计，设计了相应的硬件电路，研制了20KW中频感应加热电源。
本设计中感应加热电源采用IGBT作为开关器件，可工作在10 Hz～10 kHz频段。它由整流器、滤波器、和逆变器组成。整流器采用不可控三相全桥式整流电路。滤波器采用两个电解电容和一个电感组成Ⅱ型滤波器滤波和无源功率因数校正。逆变器主要由PWM控制器SG3525A控制四个IGBT的开通和关断，实现DC-AC的转换。
设计中采用的芯片主要是PWM控制器SG3525A和光耦合驱动电路HCPL-316J。设计过程中程充分利用了SG3525A的控制性能，具有宽的可调工作频率，死区时间可调，具有输入欠电压锁定功能和双路输出电流。由于HCPL-316J具有快的开关速度（500ns），光隔离，故障状态反馈，可配置自动复位、自动关闭等功能，所以选择其作为IGBT的驱动。
对原理样机的调试结果表明，所完成的设计实现了设计任务规定的基本功能。此外，为了满足不同器件对功率需要的要求，设计了功率可调。这部分超出了设计任务书规定的任务。-induction heating with high heating efficiency, speed and good controllability and easy to mechanization. the advantages of automation, in melting, casting, bending, forging, welding and surface heat treatment and other industries have been widely employed. According to the design tasks for the design of the program design, design corresponding to the hardware circuit, Development of 20 KW induction heating power. The design of induction heating power IGBT used as a switching device, which can work in 10 Hz - 10 kHz frequency band. It consists of rectifier, filter, and the inverter components. Controlled Rectifier not use the entire three-phase bridge rectifier circuit. 2 filter used an electrolytic capacitor and inductor components II-type filter and passive PFC. Inverter mainly by the PW
Platform: |
Size: 5144 |
Author: wq57 |
Hits:
Description: 中频感应加热以其加热效率高、速度快，可控性好及易于实现机械化、自动化等优点，已在熔炼、铸造、弯管、热锻、焊接和表面热处理等行业得到广泛的应用。
本设计根据设计任务进行了方案设计，设计了相应的硬件电路，研制了20KW中频感应加热电源。
本设计中感应加热电源采用IGBT作为开关器件，可工作在10 Hz～10 kHz频段。它由整流器、滤波器、和逆变器组成。整流器采用不可控三相全桥式整流电路。滤波器采用两个电解电容和一个电感组成Ⅱ型滤波器滤波和无源功率因数校正。逆变器主要由PWM控制器SG3525A控制四个IGBT的开通和关断，实现DC-AC的转换。
设计中采用的芯片主要是PWM控制器SG3525A和光耦合驱动电路HCPL-316J。设计过程中程充分利用了SG3525A的控制性能，具有宽的可调工作频率，死区时间可调，具有输入欠电压锁定功能和双路输出电流。由于HCPL-316J具有快的开关速度（500ns），光隔离，故障状态反馈，可配置自动复位、自动关闭等功能，所以选择其作为IGBT的驱动。
对原理样机的调试结果表明，所完成的设计实现了设计任务规定的基本功能。此外，为了满足不同器件对功率需要的要求，设计了功率可调。这部分超出了设计任务书规定的任务。-induction heating with high heating efficiency, speed and good controllability and easy to mechanization. the advantages of automation, in melting, casting, bending, forging, welding and surface heat treatment and other industries have been widely employed. According to the design tasks for the design of the program design, design corresponding to the hardware circuit, Development of 20 KW induction heating power. The design of induction heating power IGBT used as a switching device, which can work in 10 Hz- 10 kHz frequency band. It consists of rectifier, filter, and the inverter components. Controlled Rectifier not use the entire three-phase bridge rectifier circuit. 2 filter used an electrolytic capacitor and inductor components II-type filter and passive PFC. Inverter mainly by the PW
Platform: |
Size: 5120 |
Author: wq57 |
Hits:
Description: 此开关稳压电源由AT89S52单片机作为控制核心。系统包括AD采样，PID控制，PWM输出，构成闭环系统。交流电源输入到整流模块，经整流滤波后输出平稳的直流电压。该直流电压直接输出至IGBT全桥变换器模块。高精度AD转换器将后端输出的电压电流信号由模拟信号量变为数字量供给单片机进行数字PlD运算，经过PID控制运算后，由控制模块输出PWM调制波形至IGBT栅极，构成一个闭环系统，控制电压稳定输出，从而实现开关稳压电源控制系统。此外，可由键盘输入欲得电压值，从LCD显示实际电压值，人机交互界面友好。-This switching power supply control by the core as a single-chip AT89S52. AD sampling system, PID control, PWM output, constitute a closed-loop system. AC power input to the rectifier module, after filtering by the rectifier output DC voltage stable. The output DC voltage directly to the IGBT full-bridge converter modules. Precision will be the back-end AD converter output voltage and current signals from the analog signal into a digital quantity to supply the number of single-chip computing PlD, after PID control algorithms, the control module from the output PWM waveform modulation IGBT gate to form a closed-loop system, the control voltage output, in order to achieve switching power supply control system. In addition, by欲得keyboard input voltage from the LCD displays the actual voltage value, user-friendly human-computer interaction.
Platform: |
Size: 46080 |
Author: 周陶钧 |
Hits:
Description: 基于单位功率因数控制策略的单相有源滤波，去掉非线性负载部分即为单相全控整流。开关器件采用IGBT。-Based on the unity power factor control strategy of single-phase active power filter, remove the part of non-linear load is the single-phase full-controlled rectifier. Switching device IGBT.
Platform: |
Size: 7168 |
Author: 雷宾 |
Hits:
Description: 基于单位功率因数控制策略的三相全控整流。开关器件采用IGBT。PWM波形产生控制电路里使用的饱和限制模块，就是限制波形的幅度的，对输出直流电压幅值影响很大。-Based on the unity power factor control strategy of three-phase full-controlled rectifier. Switching device IGBT. PWM waveform generator control circuit in the saturation limit the use of modules, is to restrict the range of waveform and amplitude of the output DC voltage impact.
Platform: |
Size: 8192 |
Author: 雷宾 |
Hits:
Description: 用IGBT元器件进行的三相全控整流桥的仿真电路-Components used for the three-phase IGBT full bridge controlled rectifier circuit simulation
Platform: |
Size: 8192 |
Author: 徐星星 |
Hits:
Description: 文件最前面标有svpwm的表示该文件：三相电源先通过二极管整流，在用IGBT以svpwm方式三相逆变，驱动电机运转。
其他的都是simulink中对一些常用模块的功能进行比较简单的练习-File front marked with svpwm representation of the file: the first three-phase power rectifier diode, IGBT svpwm three-phase inverter drive motor running. Simple exercises are simulink some commonly used module functions
Platform: |
Size: 252928 |
Author: 万纪博 |
Hits:
Description: 三相PWM整流控制，采用三桥IGBT反并联二极管-three-phase PWM rectifier
Platform: |
Size: 12288 |
Author: |
Hits:
Description: 详细介绍了采用IGBT桥反并联二极管的整流电路的模型-IGBT rectifier
Platform: |
Size: 62464 |
Author: 卫鞅 |
Hits:
Description: highly efficient AC-DC converter for small wind power generation systems using a brushless DC generator (BLDCG)
is presented in this paper. The market standard AC-DC converter for a BLDCG consists of a three-phase diode rectifier and a
boost DC-DC converter, which has an IGBT and a fast recovery diode (FRD).
Platform: |
Size: 1503232 |
Author: aldinei |
Hits:
Description: The circuit models a standard shunt AHF with IGBT inverter and series inductor on the AC side and DC capacitor energization. The load consists of two diode rectifiers which are phase-shifted by 30 degrees. The Delta-Y connected rectifier is connected after 10 cycles to change the load 6-pulse to 12-pulse.
The AHF uses a PLL to generate a reference sinusoidal source current which is in-phase and has the same RMS gain as the load current. The current error between the load current and the reference current is generated by the IGBT Bridge through hysteresis switching. The AHF aims to inject this current error at the point of common coupling in order to match the source current as closely as possible with the reference current.-The circuit models a standard shunt AHF with IGBT inverter and series inductor on the AC side and DC capacitor energization. The load consists of two diode rectifiers which are phase-shifted by 30 degrees. The Delta-Y connected rectifier is connected after 10 cycles to change the load 6-pulse to 12-pulse.
The AHF uses a PLL to generate a reference sinusoidal source current which is in-phase and has the same RMS gain as the load current. The current error between the load current and the reference current is generated by the IGBT Bridge through hysteresis switching. The AHF aims to inject this current error at the point of common coupling in order to match the source current as closely as possible with the reference current.
Platform: |
Size: 20480 |
Author: shaker |
Hits:
Description: 电力电子，相控整流电路，基于igbt的直流输电(Power electronics, phase controlled rectifier circuit, DC transmission based on IGBT)
Platform: |
Size: 31744 |
Author: chrisREE
|
Hits: