Location:
Search - jlink 8
Search list
Description: 1、在MDK下让ULINK与ULINK2共存调试ARM：
1.1、安装MDK3.20或以它版本；
1.2、拷贝BIN文件夹到keil的安装目录下（例如c:\Keil\ARM\ 此步实际是安装ULINK1需用的DLL）；
1.3、将windows文件夹拷贝到系统安装目录(例如c:\ 此步其实是安装ULINK1的驱动)；
1.4、打开KEIL,选择File菜单下的License Management，拷贝CID；
1.5、用KEIL_Lic.exe生成License,并注册(此为KEIL最新注册机，支持MDK3.20)
1.6、打开keil的安装目录下的TOOLS.ini（见图03）文件，改成如下（见图02）：
1.7、请注意区分内核（在DEBUG介面设置）ULINK Cortex Debugger用于Cortex核； ULINK ARM Debugger是用于ARM7/9的调试；
1.8、恭喜你可以用MDK下让ULINK与ULINK2共存调试ARM了,祝大家调得开心；-mdk-3.24 crack
Platform: |
Size: 588800 |
Author: LUCK |
Hits:
Description: j-link 8 schematic and binary code
Platform: |
Size: 75776 |
Author: captainh |
Hits:
Description: Jlink V8 clone. the programer and debuger for ARM.
This file include schematic and firmware for Jlink V8.
Platform: |
Size: 7809024 |
Author: tuong |
Hits:
Description: 1、该例程为STM32串口1测试例程。
2、使用说明
(1)工程文件路径：.\USER\STM32-DEMO.uvprojj。
(2)请使用MDK 4.0以上版本打开,MDK版本过低会导致无法识别工程。
(3)下载调试工具为JLINK。
(4)请将串口线(两头皆为母的交叉串口线)插在板子COM1口上,并打开超级终端或串口助手，配置波特率115200，8位，一个停止位，无校验位。
(5)插上DC-5V电源、插上JLINKV8后，点击MDK工具栏中的LOAD按钮即可下载程序。-1, the routine test routines for the serial one. 2, the use of (a) the project file path:. \ USER \ STM32-DEMO.uvprojj. (2) Please use the MDK 4.0 or later to open, MDK version is too low can cause unrecognized works. (3) download debugging tools JLINK. (4) connect the serial cable (two are female crossover serial cable) plugged into the COM1 port on the board, and open HyperTerminal or serial assistant, configure the baud rate 115200 bits, one stop bit, no parity. (5) Plug DC-5V power supply, plug JLINKV8, click on the toolbar MDK LOAD button to download the program.
Platform: |
Size: 2349056 |
Author: wefj |
Hits:
Description: JLink_OB_stm32 all source for PCB ( 2 layers2)in Proteus 8.0
Platform: |
Size: 239616 |
Author: ly quoc huy |
Hits:
Description: set of C language code to set up and work with ADC on ARM Microcontroller
TYPE NXP
Platform: |
Size: 205824 |
Author: reza |
Hits:
Description: linux版图形界面的jlink，相当于windows下的j-flasher,功能不完整-GUI jlink for linux
Platform: |
Size: 47104 |
Author: 唐三水 |
Hits:
Description: ADC(Programming whit JLink or Flash Magic)
Platform: |
Size: 205824 |
Author: ali_asj66
|
Hits:
Description: 使用外设：串口线一跟，通过COM1连接PC
** 实验名：【B】USART_TEST
** keil MDK-ARM Standard Version：V4.22A
** 软件库(keil) Version: V2.0.1
** 固件库(ST) Version: V
*************************************/
/***********************************
** 实验现象：
1、首先进行常规配置(RCC、NVIC、GPIO)，然后配置串口1(115200baud 8位数据位 1位停止位 无奇偶校验位)
2、通过对USART1写操作，完成了向PC发送字符串的功能
3、此实验对串口的操作都是通过调用ST固件库，
** 实验说明：
1、打开超级终端，进行相同的设置
2、通过JLINK烧写程序，按下“RESET”键，可以看到PC接收到的字符串
“welcome to STM32”(using peripherals: the serial port line is a heel, and the PC is connected to the COM1
* * * experimental Name: [B] USART_TEST
* * * keil MDK-ARM Standard Version:V4.22A
* * software library (keil) Version: V2.0.1
* * firmware library (ST) Version: V
*************************************/
/***********************************
* * experimental phenomena:
1, first of all the regular configuration (RCC, NVIC, GPIO), and then the serial port 1 (115200baud 8 bit data bit, 1 bit stop bit and no parity bit)
2. By writing to USART1, the function of sending strings to PC is completed
3. The operation of this experiment on the serial port is by calling the ST firmware library.
* * the experiment shows that:
1. Open the super terminal and make the same setup
2, through the JLINK burning program, press the "RESET" key, you can see the string received by PC
Welcome to STM32)
Platform: |
Size: 653312 |
Author: 72521
|
Hits: