Location:
Search - nand jtag
Search list
Description: CPU MPC8270
SDRAM K4S561632 x4(128Mbyte)
BOOT FLASH AM29LV640(8MByte)
Nand FLASH 兼容三星的K9F系列的FLASH
CPU JTAG口 核心板集成
串口 3个 SMC1、SMC2、SCC1
（SMC1扩展板和核心板都有输出接口）
以太网口 3个 FCC1、FCC2、FCC3
可编程发光二极管 6个
可编程发光数码二极管 1个
系统外部中断输入 4个
外部系统复位输入 1个
外部实时时钟 系统掉电，时钟不丢失
核心板电源 单一5V电源
开发系统电源 外部5V/3A输入或者ATX电源
（注意：这两个电源不能同时插入使用）
BOOTLOADER U-BOOT
操作系统 Linux 2.4.18
开发工具 全套的设计开发工具，包括开发主机的操作系统安装盘
驱动软件 提供所有接口的驱动程序源代码
核心板尺寸 123mm X 86mm
扩展板尺寸 178mm X 134mm
-MPC8270 CPU SDRAM K4S561632 x4 (128Mbyte) FLASH AM29LV640 BOOT (8MByte) Nand Flash compatible Samsung K9F3208W0A series of JTAG FLASH mouth core CPU board integrated Serial three SMC1, SMC2. SCC1 (SMC1 expansion boards and core boards have output Interface) Ethernet port three FCC1, FCC2. FCC3 programmable LED six programmable digital luminescent diode an external interrupt input system four external systems reset input an external real-time clock system power loss. clock core plate not lost a single 5V power supply system development 5V/3A external power input or ATX power supply (Note Italy : these two power use can not be inserted) BOOTLOADER U-BOOT Linux 2 .4.18 complete set of development tools to develop design tools, including the development of the mainframe operating system softwa
Platform: |
Size: 486342 |
Author: 王强 |
Hits:
Description: jflash-s3c2440是一个工具程序.其能通过JTAG接口将主机端的文件写入基于三星ARM处理器S3C2440的开发板上的NandFlash或NorFlash中.-jflash - s3c2440 procedure is a tool. Through its JTAG interface to mainframe - the documents included Samsung ARM processor based on the CPU board development of the NAND Flash or No rFlash China.
Platform: |
Size: 22317 |
Author: 何海峰 |
Hits:
Description: JFlash程序。三星ARM平台上用于烧写Nand 和Nor Flash的程序源代码。运行在Windows PC上，可通过并口仿真jtag调试目标环境。（烧写前，host需安装giveio驱动）
Platform: |
Size: 36056 |
Author: henry.s.wang |
Hits:
Description: 星光AT91RM9200开发板的原理图,板有SDRAM，NOR FLASH ,NAND FLASH, CF卡插槽，SD卡插槽。以太网口，jtag，等等，可以参考。
Platform: |
Size: 111530 |
Author: Potossas |
Hits:
Description: u-boot.bin是使用JTAG转换板来烧写到AT2440EVB开发板上Nand flash(K9F1208)中
Platform: |
Size: 9755136 |
Author: jianglingling |
Hits:
Description: s3c2410的启动代码，包括BSP和多个测试程序。用ADS1.2编译。用JTAG下载到Nor或是NAND 进行启动
Platform: |
Size: 762741 |
Author: 电子爱好者 |
Hits:
Description: CPU MPC8270
SDRAM K4S561632 x4(128Mbyte)
BOOT FLASH AM29LV640(8MByte)
Nand FLASH 兼容三星的K9F系列的FLASH
CPU JTAG口 核心板集成
串口 3个 SMC1、SMC2、SCC1
（SMC1扩展板和核心板都有输出接口）
以太网口 3个 FCC1、FCC2、FCC3
可编程发光二极管 6个
可编程发光数码二极管 1个
系统外部中断输入 4个
外部系统复位输入 1个
外部实时时钟 系统掉电，时钟不丢失
核心板电源 单一5V电源
开发系统电源 外部5V/3A输入或者ATX电源
（注意：这两个电源不能同时插入使用）
BOOTLOADER U-BOOT
操作系统 Linux 2.4.18
开发工具 全套的设计开发工具，包括开发主机的操作系统安装盘
驱动软件 提供所有接口的驱动程序源代码
核心板尺寸 123mm X 86mm
扩展板尺寸 178mm X 134mm
-MPC8270 CPU SDRAM K4S561632 x4 (128Mbyte) FLASH AM29LV640 BOOT (8MByte) Nand Flash compatible Samsung K9F3208W0A series of JTAG FLASH mouth core CPU board integrated Serial three SMC1, SMC2. SCC1 (SMC1 expansion boards and core boards have output Interface) Ethernet port three FCC1, FCC2. FCC3 programmable LED six programmable digital luminescent diode an external interrupt input system four external systems reset input an external real-time clock system power loss. clock core plate not lost a single 5V power supply system development 5V/3A external power input or ATX power supply (Note Italy : these two power use can not be inserted) BOOTLOADER U-BOOT Linux 2 .4.18 complete set of development tools to develop design tools, including the development of the mainframe operating system softwa
Platform: |
Size: 486400 |
Author: 王强 |
Hits:
Description: jflash-s3c2440是一个工具程序.其能通过JTAG接口将主机端的文件写入基于三星ARM处理器S3C2440的开发板上的NandFlash或NorFlash中.-jflash- s3c2440 procedure is a tool. Through its JTAG interface to mainframe- the documents included Samsung ARM processor based on the CPU board development of the NAND Flash or No rFlash China.
Platform: |
Size: 22528 |
Author: 何海峰 |
Hits:
Description: jtag 工具使用说明及工具含givo源码。-jtag tools and tools for use with givo source.
Platform: |
Size: 1030144 |
Author: duan |
Hits:
Description: JFlash程序。三星ARM平台上用于烧写Nand 和Nor Flash的程序源代码。运行在Windows PC上，可通过并口仿真jtag调试目标环境。（烧写前，host需安装giveio驱动）-JFlash procedures. Samsung ARM platform for Nand and Nor Flash programmer s source code. Running on Windows PC, via parallel port JTAG debug target simulation environment. (Programmer before, host to install giveio drive)
Platform: |
Size: 60416 |
Author: henry.s.wang |
Hits:
Description: 星光AT91RM9200开发板的原理图,板有SDRAM，NOR FLASH ,NAND FLASH, CF卡插槽，SD卡插槽。以太网口，jtag，等等，可以参考。-Stars AT91RM9200 development board schematics, board has SDRAM, NOR FLASH, NAND FLASH, CF card slot, SD card slot. Ethernet port, jtag, etc., can refer to.
Platform: |
Size: 111616 |
Author: Potossas |
Hits:
Description: s3c2410的启动代码，包括BSP和多个测试程序。用ADS1.2编译。用JTAG下载到Nor或是NAND 进行启动-S3C2410 s startup code, including the BSP and multiple testing procedures. ADS1.2 compiler used. Nor with JTAG download or activate NAND
Platform: |
Size: 762880 |
Author: 电子爱好者 |
Hits:
Description: i.mx27开发板的整套详细原理图，包括：DDR SDRAM, NAND FLASH, NOR FLASH, USB OTG, USB HOST,FEC PHY, UART,JTAG等等接口-i.MX27 development board schematic details of the package, including: DDR SDRAM, NAND FLASH, NOR FLASH, USB OTG, USB HOST, FEC PHY, UART, JTAG interface, etc.
Platform: |
Size: 741376 |
Author: 清木 |
Hits:
Description: 同时支持Wiggler和sjf的nand flash烧写源程序-At the same time support the Wiggler and SJF source of nand flash programmer
Platform: |
Size: 2009088 |
Author: 张天昀 |
Hits:
Description: 大学使用过H-flash吗?是不是通过此软件仿真和编程非常方便?比一般的JTAG好得多?但是有时候出现死机,甚至不能编写的情况,本人根据实际的CPU的datasheet编写了两个启动代码:
一个是H-JTAG-SERVER的启动配置代码
另一个是H-JTAG-FLASH启动配置代码
实际上就是设置好一些寄存器.
按照我的这个配置文档来配置偏真器和烧写工具,将会节约您大多数的时间,通常烧写nor flash只要几十秒,当然,现在h-flash是不支持nand flash 的,但是,我先前上载过uboot代码,您可以通过此配置文件在norflash上烧写uboot,然后再通过uboot之tftp 下载代码并烧写nand flash,非常不错,且适合于初学者.-h--jtag-server---configfile for s3c2440
h--jtag-flash---configfile for s3c2440
Platform: |
Size: 1024 |
Author: 李艳飞 |
Hits:
Description: You can use this as one method to un-brick your Neo1973, in case your bootloader has been corrupted.
sjf2410-linux is a linux-enabled version of the sjf2410 tool.
It allows you to use a wiggler compatible JTAG Probe to program NAND and NOR flash attached to the S3C2410 (In the Neo1973, we only use NAND flash).
Platform: |
Size: 23552 |
Author: a872312 |
Hits:
Description: Software to implement interface with NAND Flash chips. Based on S3C2410 chip. It includes software to read NAND flash memory through JTAG interface of the chip using LPT port. (NAND flash interface spec is included)
Platform: |
Size: 714752 |
Author: Langust |
Hits:
Description: nand flash 型号为k9s1208的ADS烧写专用Jtag程序-nand flash model k9s1208 the ADS Shaoxie dedicated Jtag program
Platform: |
Size: 855040 |
Author: 王青云 |
Hits:
Description: Direct (w/o ram usage) jtag nand flash programmer for several Qualcomm CPUs. Uses JLink
Platform: |
Size: 15360 |
Author: flowswitch |
Hits:
Description: u-boot-1.1.6.tar.bz2 是uboot1.1.6最原始的代码
u-boot-1.1.6_OpenJTAG_nand_large_page.tar.bz2 是修改后的uboot，支持大页nand，usb烧写程序-u-boot-1.1.6.tar.bz2 is uboot1.1.6 most original code u-boot-1.1.6_OpenJTAG_nand_large_page.tar.bz2 is modified uboot, support for large page nand, usb programmer program
Platform: |
Size: 20496384 |
Author: 邵德鹏 |
Hits: