Location:
Search - s0
Search list
Description: 利用BFS算法解八数码问题
在3*3的方格上放着1-8数码,有一空格为0变化规则为空格可以和上,下,右,左四个相邻的数字互换,
至到和目标状态相等,
每一种状态用一个结点表示
而每个结点每次变化最多有四种结点,将这些结点依次入队列中,
例如初始结点S0,入队列后出队,将S0变化最多产生的四种结点S01,S02,S03,S04依次入队列中,
当S01出队后,产生的四种结点S11,S12,S13,S14(实际上不会有四种结点)依次入队,
每次出队时与结束结点相比较,如果相等则退出,
为了,防止已经入队的结点再次入队,(这样会造成列循环),将每次入队的结点设置一个标识号,
四种变化即:向上,向下,向右,向左,我们要求向上和向下互斥,向右和向左互斥-use BFS Algorithm for eight in digital 3 * 3, the box copy digital 1-8, 0 for a change in spacing rules for space and can, under the right, left four adjacent digital exchange, and to target state of the same, each state with a node and each said nodes changes each have up to four nodes, and these nodes will be followed into the queue, for example, the initial node S0, out into the queue after the teams will have the most S0 changes of the four nodes S01, S02, SO3, S04-followed cohort, when S01 out teams after the four nodes S11 , S12, S13, S14 (not, in fact, four nodes), followed by the team, each team up with the end node comparison, if the same were to withdraw from, in order to prevent the team has the guitar again joined the team, (this will lead out cycle), each of the team set up a
Platform: |
Size: 13589 |
Author: 刘少人 |
Hits:
Description: SpeechClock是在凌阳提供的电子钟的范例的基础之上实现的电子时钟的源程序
调试环境:unSPIDE184
运行设备:SPCE061A+LED&KEY模板
功能:时钟显示(日期与时间) LED显示
电子报时、整点报时、闹钟
使用说明:B口b0-b7 连 DIG
b8-b15连 SEG
按S0键报时,按S1或S2键切换显示(时间或日期)
长按S0键进入校时状态,在这个状态下,按S0切换校时对象,按S1、S2增减-SpeechClock in Sunplus provides an electronic bell example on the basis of achieving the electronic clock source debugging environment : unSPIDE184 operating equipment : LED SPCE061A
Platform: |
Size: 133843 |
Author: 张玉峰 |
Hits:
Description: 人工智能上机实验题目:自动求解八数码难题。
八数码难题:在3×3的方格棋盘上,分别放置了标有数字1,2,3,4,5,6,7,8的八张牌,初始状态S0,目标状态如下图所示,可以使用的操作有:空格左移,空格上移,空格右移,空格下移。
Platform: |
Size: 51627 |
Author: panyy |
Hits:
Description: 电力系统在台稳定计算式电力系统不正常运行方式的一种计算。它的任务是已知电力系统某一正常运行状态和受到某种扰动,计算电力系统所有发电机能否同步运行
1运行说明:
请输入初始功率S0,形如a+bi
请输入无限大系统母线电压V0
请输入系统等值电抗矩阵B
矩阵B有以下元素组成的行矩阵
1正常运行时的系统直轴等值电抗Xd
2故障运行时的系统直轴等值电抗X d
3故障切除后的系统直轴等值电抗
请输入惯性时间常数Tj
请输入时段数N
请输入哪个时段发生故障Ni
请输入每时段间隔的时间dt-power system stability in the Taiwan Power computing system is not the normal operating mode of calculation. Its mission is a known power system uptime status and be subject to some disturbance, computing power system all synchronous generator can run an operation Note : Please enter the initial power S0, shaped like a bi Please enter the infinite system bus voltage V0 Please enter the system equivalent reactance matrix B matrix B group has the following elements the line matrix into a normal operation of the system straight axis equivalent reactance Xd two fault systems running straight axis equivalent reactance X d 3 after resection of the fault system straight axis equivalent reactance Please enter the inertial time constant Tj Please enter the number of hours which N Please enter a tim
Platform: |
Size: 1107 |
Author: 魏鹏 |
Hits:
Description: 电力系统静态稳定计算一般采用小干扰法,即首先计算近似的线性微分方程组系数矩阵的特征根。然后根据特征根在复平面上的特性,判别电力系统运行的稳定性
操作说明:
请输入初始功率S0,形如a+bi
请输入无限大系统母线电压V0
请输入系统直轴等值电抗的大小Xd
请输入同步电角速度
请输入惯性时间常数Tj
请输入综合阻尼系数D-static power system stability calculation generally use small interfering, first, calculate the approximate linear equations of the coefficient matrix eigenvalue. According eigenvalue in the complex plane on the characteristics of the identification operation of the power system stability operations : Please enter the initial power S0, shaped like a bi Please enter the infinite system bus voltage V0 Please enter the system straight axis equivalent reactance the size Please enter synchronous Xd Please enter the angular velocity -- inertia time constant Tj Please enter the integrated damping D
Platform: |
Size: 862 |
Author: 魏鹏 |
Hits:
Description: 一对四分用器的VHDL源码,(输入:D ,输出: Y3 Y2 Y1 Y0,另有两个输入控制端S1与S0控制输出选择)-tended to a quarter of VHDL source code, (Input : D, output : Y3 Y2 Y1 Y0. otherwise control the importation of two-S1 and S0 output control options)
Platform: |
Size: 1180 |
Author: 范文晓 |
Hits:
Description: DTW算法 汉语0~9 语音识别
录音 comp.wav后 执行test.m即可
建议自己录s0~s9 十个模板-DTW 0 ~ 9 Chinese speech recognition after recording comp.wav implementation can be built test.m and recorded their molecule-s9 10 template
Platform: |
Size: 60432 |
Author: 胡杨 |
Hits:
Description: 说明:本LCD为LCM161(HD44780驱动器)字符显示器.
接线:LCD D0-D8(PIN7-14) 对映用户板P0.0--P0.7
LCD VSS(PIN1) 接 GND,VDD(PIN2)接+5V,LCD驱动电源V0(PIN3)接可调电阻ADJ,调节亮度
LCD寄存器选择RS(PIN4)接P2.0,读写选择R/W(PIN5)接P2.1,使能端EN(PIN6)接P2.2(高电平有效)
本程序采用I/O口模仿总线时序,故无需做任何硬件扩展.屏幕显示:\"welcom to using s51f! \",按S0键可重复演示
Platform: |
Size: 1488 |
Author: 39532643 |
Hits:
Description: 1. 抢答器同时供8名选手或8个代表队比赛,分别用8个按钮S0 ~ S7表示。
2. 设置一个系统清除和抢答控制开关S,该开关由主持人控制。
3. 抢答器具有锁存与显示功能。即选手按动按钮,锁存相应的编号,并在LED数码管上显示,同时扬声器发出报警声响提示。选手抢答实行优先锁存,优先抢答选手的编号一直保持到主持人将系统清除为止。
4. 抢答器具有定时抢答功能,且一次抢答的时间由主持人设定(如30秒)。当主持人启动\"开始\"键后,定时器进行减计时,同时扬声器发出短暂的声响,声响持续的时间0.5秒左右。
5. 参赛选手在设定的时间内进行抢答,抢答有效,定时器停止工作,显示器上显示选手的编号和抢答的时间,并保持到主持人将系统清除为止。
6. 如果定时时间已到,无人抢答,本次抢答无效,系统报警并禁止抢答,定时显示器上显示00。
Platform: |
Size: 257666 |
Author: haiyang |
Hits:
Description: 4bit ALU(运算逻辑单元)的设计
给出了此次设计alu的输入输出结构及相应的位数。其中C0是一位的进位输入,A和B分别是4位的数据输入,S0、S1、M分别为一位的功能选择输入信号;Cout是一位的进位输出,F是4为的运算结果输出。
Platform: |
Size: 1597 |
Author: chenyi |
Hits:
Description: 二、课程设计的要求与数据 设计要求包括: 1. 抢答器同时供8名选手或8个代表队比赛,分别用8个按钮S0 ~ S7表示。 2. 设置一个系统清除和抢答控制开关S,该开关由主持人控制。 3. 抢答器具有锁存与显示功能。即选手按动按钮,锁存相应的编号,并在优先抢答选手 的编号一直保持到主持人将系统清除为止。 4. 抢答器具有定时抢答功能,且一次抢答的时间由主持人设定(如,30秒)。当主持人启 动"开始"键后,定时器进行减计时。 5. 参赛选手在设定的时间内进行抢答,抢答有效,定时器停止工作,显示器上显示选手 的编号和抢答的时间,并保持到主持人将系统清除为止。 6. 如果定时时间已到,无人抢答,本次抢答无效,系统通过一个指示灯报警并禁止抢答, 定时显示器上显示00。
Platform: |
Size: 122082 |
Author: kennyming |
Hits:
Description: 利用BFS算法解八数码问题
在3*3的方格上放着1-8数码,有一空格为0变化规则为空格可以和上,下,右,左四个相邻的数字互换,
至到和目标状态相等,
每一种状态用一个结点表示
而每个结点每次变化最多有四种结点,将这些结点依次入队列中,
例如初始结点S0,入队列后出队,将S0变化最多产生的四种结点S01,S02,S03,S04依次入队列中,
当S01出队后,产生的四种结点S11,S12,S13,S14(实际上不会有四种结点)依次入队,
每次出队时与结束结点相比较,如果相等则退出,
为了,防止已经入队的结点再次入队,(这样会造成列循环),将每次入队的结点设置一个标识号,
四种变化即:向上,向下,向右,向左,我们要求向上和向下互斥,向右和向左互斥-use BFS Algorithm for eight in digital 3* 3, the box copy digital 1-8, 0 for a change in spacing rules for space and can, under the right, left four adjacent digital exchange, and to target state of the same, each state with a node and each said nodes changes each have up to four nodes, and these nodes will be followed into the queue, for example, the initial node S0, out into the queue after the teams will have the most S0 changes of the four nodes S01, S02, SO3, S04-followed cohort, when S01 out teams after the four nodes S11 , S12, S13, S14 (not, in fact, four nodes), followed by the team, each team up with the end node comparison, if the same were to withdraw from, in order to prevent the team has the guitar again joined the team, (this will lead out cycle), each of the team set up a
Platform: |
Size: 13312 |
Author: 刘少人 |
Hits:
Description: SpeechClock是在凌阳提供的电子钟的范例的基础之上实现的电子时钟的源程序
调试环境:unSPIDE184
运行设备:SPCE061A+LED&KEY模板
功能:时钟显示(日期与时间) LED显示
电子报时、整点报时、闹钟
使用说明:B口b0-b7 连 DIG
b8-b15连 SEG
按S0键报时,按S1或S2键切换显示(时间或日期)
长按S0键进入校时状态,在这个状态下,按S0切换校时对象,按S1、S2增减-SpeechClock in Sunplus provides an electronic bell example on the basis of achieving the electronic clock source debugging environment : unSPIDE184 operating equipment : LED SPCE061A
Platform: |
Size: 328704 |
Author: 张玉峰 |
Hits:
Description: 该学习课件主要是对catia二次开发的辅助学习材料,在目前该方面的材料很少的情况下,此中的内容是不可多得的呀!-the learning courseware was to catia secondary development of assisted learning materials, in the current context of the material a few circumstances, the contents of that process is rare!
Platform: |
Size: 623616 |
Author: daoshou |
Hits:
Description: 人工智能上机实验题目:自动求解八数码难题。
八数码难题:在3×3的方格棋盘上,分别放置了标有数字1,2,3,4,5,6,7,8的八张牌,初始状态S0,目标状态如下图所示,可以使用的操作有:空格左移,空格上移,空格右移,空格下移。
-err
Platform: |
Size: 805888 |
Author: panyy |
Hits:
Description: 电力系统在台稳定计算式电力系统不正常运行方式的一种计算。它的任务是已知电力系统某一正常运行状态和受到某种扰动,计算电力系统所有发电机能否同步运行
1运行说明:
请输入初始功率S0,形如a+bi
请输入无限大系统母线电压V0
请输入系统等值电抗矩阵B
矩阵B有以下元素组成的行矩阵
1正常运行时的系统直轴等值电抗Xd
2故障运行时的系统直轴等值电抗X d
3故障切除后的系统直轴等值电抗
请输入惯性时间常数Tj
请输入时段数N
请输入哪个时段发生故障Ni
请输入每时段间隔的时间dt-power system stability in the Taiwan Power computing system is not the normal operating mode of calculation. Its mission is a known power system uptime status and be subject to some disturbance, computing power system all synchronous generator can run an operation Note : Please enter the initial power S0, shaped like a bi Please enter the infinite system bus voltage V0 Please enter the system equivalent reactance matrix B matrix B group has the following elements the line matrix into a normal operation of the system straight axis equivalent reactance Xd two fault systems running straight axis equivalent reactance X d 3 after resection of the fault system straight axis equivalent reactance Please enter the inertial time constant Tj Please enter the number of hours which N Please enter a tim
Platform: |
Size: 1024 |
Author: 魏鹏 |
Hits:
Description: 电力系统静态稳定计算一般采用小干扰法,即首先计算近似的线性微分方程组系数矩阵的特征根。然后根据特征根在复平面上的特性,判别电力系统运行的稳定性
操作说明:
请输入初始功率S0,形如a+bi
请输入无限大系统母线电压V0
请输入系统直轴等值电抗的大小Xd
请输入同步电角速度
请输入惯性时间常数Tj
请输入综合阻尼系数D-static power system stability calculation generally use small interfering, first, calculate the approximate linear equations of the coefficient matrix eigenvalue. According eigenvalue in the complex plane on the characteristics of the identification operation of the power system stability operations : Please enter the initial power S0, shaped like a bi Please enter the infinite system bus voltage V0 Please enter the system straight axis equivalent reactance the size Please enter synchronous Xd Please enter the angular velocity-- inertia time constant Tj Please enter the integrated damping D
Platform: |
Size: 1024 |
Author: 魏鹏 |
Hits:
Description: 一对四分用器的VHDL源码,(输入:D ,输出: Y3 Y2 Y1 Y0,另有两个输入控制端S1与S0控制输出选择)-tended to a quarter of VHDL source code, (Input : D, output : Y3 Y2 Y1 Y0. otherwise control the importation of two-S1 and S0 output control options)
Platform: |
Size: 1024 |
Author: 范文晓 |
Hits:
Description: DTW算法 汉语0~9 语音识别
录音 comp.wav后 执行test.m即可
建议自己录s0~s9 十个模板-DTW 0 ~ 9 Chinese speech recognition after recording comp.wav implementation can be built test.m and recorded their molecule-s9 10 template
Platform: |
Size: 60416 |
Author: 胡杨 |
Hits:
Description: 说明:本LCD为LCM161(HD44780驱动器)字符显示器.
接线:LCD D0-D8(PIN7-14) 对映用户板P0.0--P0.7
LCD VSS(PIN1) 接 GND,VDD(PIN2)接+5V,LCD驱动电源V0(PIN3)接可调电阻ADJ,调节亮度
LCD寄存器选择RS(PIN4)接P2.0,读写选择R/W(PIN5)接P2.1,使能端EN(PIN6)接P2.2(高电平有效)
本程序采用I/O口模仿总线时序,故无需做任何硬件扩展.屏幕显示:"welcom to using s51f! ",按S0键可重复演示-说?鳎罕?LCD??LCM161 ??HD44780驱 ????????
Platform: |
Size: 1024 |
Author: 39532643 |
Hits: