Location:
Search - sd usb linux
Search list
Description: marvel USB linux无线网卡驱动,已经移植到ARM9,可以编译使用.-marvel USB linux wireless card driver has been ported to ARM9, the compiler can use.
Platform: |
Size: 265216 |
Author: forest |
Hits:
Description: host usb 主设备程序 支持sd卡 mouse keyboard 的最单单的驱动程序 gcc编译-the main host usb device supports sd card mouse keyboard alone most of the gcc compiler driver
Platform: |
Size: 405504 |
Author: 肖夏 |
Hits:
Description: 广嵌GEC2410开发板实验程序及PDF文档
GEC2410实战手册目录
一、基本接口实验
1.1 ARM汇编指令编程实验
1.2 Thumb和ARM指令混合编程实验
1.3 C和ARM汇编混合编程实验
1.4 C编程实现LED控制实验
1.5 ARM启动及工作模式切换实验
1.6 外部中断应用实验
1.7 看门狗定时器应用实验
1.8 PWM控制蜂鸣器实验
1.9 实时时钟及闹钟设计实验
1.10 Nor flash 应用实验
1.11 Nand flash 应用实验
二、人机接口实验
2.1 矩阵键盘扫描实验
2.2 ADC模数转换实验
2.3 TFT液晶屏显示实验
2.4 触摸屏控制实验
2.5 汉字字符显示实验
2.6 SD卡应用实验
三、通信接口实验
3.1 串口通信应用实验
3.2 红外模块控制实验
3.3 IIC 总线应用实验
3.4 TFTP以太网通讯实验
3.5 USB device 实验
3.6 IIS音频接口实验.
四、实时操作系统实验
4.1 U－boot在GEC2410上的移植
4.2 嵌入式linux内核移植实现
4.3 uC/OS-II在GEC2410上的移植
4.4 uC/OS-II应用程序设计
4.5 WinCE的BSP设计及hello world实现
4.6 Nucleus PLUS 在GEC2410上的移植
4.7 Nucleus PLUS应用程序设计
共30个实验
-GEC2410开发板实验程序
Platform: |
Size: 24027136 |
Author: 韩坤 |
Hits:
Description: 周立功magic2410实验箱源码
第6章Linux高级实验(part1)
6.1 Linux内核编译实验
6.2 Linux根文件系统实验
6.3 CAT1025读/写实验.
6.4 ZLG7290键盘读取
6.5 USB-E2PROM编程器实验
6.6 SD/MMC卡实验
6.7触摸屏实验
6.8 PCMCIA接口CF卡实验
-Magic2410 week experimental box Ligong source Linux High Chapter 6 Experimental (part1) 6.1 Linux kernel 6.2 Linux compiler Experimental Experimental root file system 6.3 CAT1025 read/write test. 6.4 ZLG7290 read keyboard 6.5 USB-E2PROM experimental programmer 6.6 SD/MMC Card Touch Screen Experiment 6.7 Experiment 6.8 PCMCIA interface CF card experiment
Platform: |
Size: 1734656 |
Author: yc |
Hits:
Description: 几个linux的驱动程序，包括button, led, usb ,lcd, mouse,sd卡等，希望对学习linux的朋友有帮助。-offer some linux drivers, can email me to discuss if necessary.
Platform: |
Size: 47104 |
Author: luo |
Hits:
Description: 本书全面介绍了嵌入式Linux系统开发过程中，从底层系统支持到上层GUI应用的方方面面，内容涵盖Linux操作系统的安装及相关工具的使用、配置，嵌入式编程所需要的基础知识(交叉编译工具的选项设置、Makefile语法、ARM汇编指令等)，硬件部件的使用及编程(囊括了常见硬件，比如UART、I*IC、LCD等)，U-Boot、Linux内核的分析、配置和移植，根文件系统的构造(包括移植busybox、glibc、制作映象文件等)，内核调试技术(比如添加kgdb补丁、栈回溯等)，驱动程序编写及移植(LED、按键、扩展串口、网卡、硬盘、SD卡、LCD和USB等)，GUI系统的移植(包含两个GUI系统：基于Qtopia和基于X)，应用程序调试技术。
本书从最简单的点亮一个LED开始，由浅入深地讲解，使读者最终可以配置、移植、裁剪内核，编写驱动程序，移植GUI系统，掌握整个嵌入式Linux系统的开发方法。
-This book a comprehensive introduction to embedded Linux system development process, from the bottom to the upper GUI application system to support all aspects of Linux operating system, covers the installation and use of related tools, configuration, embedded programming basics needed (cross- compilation tool option settings, Makefile syntax, ARM assembly instructions, etc.), the use of hardware components and programming (include the common hardware, such as UART, I* IC, LCD, etc.), U-Boot, Linux kernel analysis of , configuration, and migration, the root file system structure (including the transplant busybox, glibc, make image files, etc.), kernel debugging techniques (such as adding kgdb patch, stack back, etc.), driver programming and transplant (LED, button, extended serial port, network cards, hard drives, SD card, LCD, and USB, etc.), GUI system, transplantation (includes two GUI systems: based on Qtopia and based on X), the application debug technology.
This book, from th
Platform: |
Size: 561152 |
Author: 流浪 |
Hits:
Description: Samsung s new ARM cpu datasheet. S5PC100
Spec.
- CPU ARM Cortex-A8 667-833Mhz
- 32KB L1, 256KB L2 Cache
- Video 720p (1280x720 Play. h.264 divx, mp4...)
- nand, sd/mmc, usb booting
- Windows CE 6.0, Linux (*Android) support
- support 166MHz memory clock. DDR, mobileDDR, DDR2
* in actually, i run c100 board ddr2 bus clock at 280MHz in WinCE 6.0
Platform: |
Size: 12115968 |
Author: john |
Hits:
Description: ARM11 S3C6410底层软件 UOOBT 启动 支持SD启动 WINCE LINUX TQ6410
u-boot 版本：u-boot-1.1.6
主要功能：
1、支持一键式菜单，操作简单方便
2、支持Nand Flash擦除、读、写
3、支持USB 下载镜像
4、支持打印、设置、保存环境变量
5、支持内存内容显示、对比、修改
6、支持bootm、bootargs设置
★ 提供源代码
-ARM11 S3C6410 UOOBT underlying software start-up support SD-WINCE LINUX TQ6410 u-boot version: u-boot-1.1.6 main function: 1, to support one-click menu, easy operation 2 in support of Nand Flash erase, read, write 3 , USB download mirror 4, to support printing, set, save the environment variable 5 to support the memory content display, contrast, modify 6, support bootm, bootargs set to provide the source code ★
Platform: |
Size: 2151424 |
Author: 马义忠 |
Hits:
Description: 包含在内核补丁文件中的驱动程序源码，包括LED驱动程序，串口驱动程序，网卡驱动程序，SD卡驱动程序，LCD和USB驱动程序。-Patch file included in the kernel driver source code, including LED drivers, serial port driver, NIC driver, SD card driver, LCD, and USB drivers.
Platform: |
Size: 259072 |
Author: 季册 |
Hits:
Description: USB SD Host Controller (USHC) controller driver for linux.
Platform: |
Size: 4096 |
Author: poeerpin |
Hits:
Description: Driver for Realtek RTS51xx USB card reader for Embedded Linux.
Platform: |
Size: 10240 |
Author: vieyueqing |
Hits:
Description: DMC-9263-E采用基于ARM926EJ-S内核的ATMEL处理器AT91SAM9263, 运行频率200MHz。板载64MB的SDRAM，64MB的Nand Flash，2MB的Data Flash。DMC-9263-E嵌入式开发系统外设非常丰富，功能强大，可扩展性强，低功耗。适用于纺织行业、数控行业、汽车电子、工业触摸屏控制系统、机器人视觉、媒体处理无线应用、数字家电、车载设备、通信设备、网络终端等场合。支持嵌入式Linux和WINCE5.0操作系统。
采用Linux2.6.20内核，LINUX驱动支持：AUDIO、VGA、USB HOST、以太网、CAN、LCD 和触摸屏、IDE、SD卡、CF卡、串口等，支持QT。
WINCE5.0测试程序：蜂鸣器、GPIO、KEY、RS232等,并提供WINCE完整的镜像文件
-DMC-9263-E using the ARM926EJ-S core ATMEL processor based on AT91SAM9263, the operating frequency of 200MHz. On board 64MB SDRAM, 64MB Nand Flash, 2MB Data Flash. The DMC-9263-E embedded development system peripherals is very rich, powerful, extensible, low power. Is suitable for the textile industry, the CNC industry, automotive electronics, industrial touch screen control system, robot vision, media processing wireless application, digital home appliances, vehicle equipment, communication equipment, network terminal and other occasions. Support Linux and embedded WINCE5.0 operating system.
Platform: |
Size: 29696 |
Author: 龙芯 |
Hits:
Description: DMC-2440-H采用基于ARM920T内核的Samsung处理器 S3C2440A, 标准主频400MHz，最高主频可达533MHz。采用64MB的SDRAM，2MB的NOR FLASH和64MB的NAND Flash。DMC-2440-H嵌入式开发系统外设非常丰富，功能强大，适用于各种手持设备、消费电子和工业控制设备的开发。支持嵌入式Linux和WINCE5.0.NET操作系统。
采用Linux -2.6.134内核，LINUX驱动支持：DM9000 网卡、串口、RTC、LED、按键、触摸屏、USB鼠标和键盘、SD/MMC 卡、Nand Flash、UDA1341 音频、LCD、优盘、USB 摄像头。支持QT, 支持MP3播放和视频播放。
WINCE5.0驱动支持：LCD、DM9000、按键、LED、NandFlash、串口、触摸屏、USB host & slave、音频等。
测试程序（ADS1.2项目文件）：RTC、ADC、key、Touchpanel、LCD、VGA、EEPROM、UDA1341、SD Card、CMOS Camera等。-DMC-2440-H based on ARM920T core Samsung processor S3C2440A, standard frequency of 400MHz, the highest frequency is 533MHz. Using 64MB SDRAM, 2MB NOR FLASH and 64MB NAND Flash. The DMC-2440-H embedded development system peripherals is very rich, powerful, suitable for development in various handheld devices, consumer electronics and industrial control equipment. Support Linux and embedded WINCE5.0.NET operating system.
Platform: |
Size: 28672 |
Author: 龙芯 |
Hits:
Description: DMC-2440-I采用基于ARM920T内核的Samsung处理器 S3C2440A, 标准主频400MHz，最高主频可达533MHz。板载64MB的SDRAM，128MB的Nand Flash以及2MB的Nor Flash。DMC-2440-I是根据S3C2440A的全部功能而开发的全功能嵌入式系统。具有外接资源丰富，性能稳定，低功耗低等特点。适合手持设备的设计开发。支持嵌入式Linux和WINCE5.0.NET操作系统。提供Wince5.0 BSP。
采用linux-2.6.29 内核,驱动支持：DM9000、各种真彩液晶、音频输入输出、触摸屏、支持高速大容量的SD 卡、RTC、看门狗、三个串口、万能USB 摄像头、鼠标和键盘、U盘,支持QT。
Wince5.0驱动支持：ATA硬盘、camera 、CS8900网口、LCD、 DM9000网口、 IIC、 Key 、LED、串口、SDHC卡、触摸屏、USB 、AC97音频、IIS等。
测试程序(ADS1.2项目文件)：中断方式按键、RTC 实时时钟、ADC 数模转换、IIS 音频播放wav、IIS 音频录音、触摸屏、I2C 总线读写AT24C08、三星3.5”LCD、640x480 真彩液晶等。-DMC- 2440- I Samsung processor S3C2440A based on ARM920T kernel, standard frequency 400 MHZ, the highest frequency of up to 533 MHZ. Onboard 64 MB SDRAM, 128 MB Nand Flash and 2 MB of Nor Flash. The DMC- 2440- I was based on S3C2440A all of the features and the development of a fully functional embedded systems. Has the rich external resources, stable performance, low power consumption is low. Design and development for handheld devices. Support the embedded Linux operating system and WINCE5.0.NET. Provide Wince5.0 BSP.
The Linux- 2.6.29 kernel driver support: DM9000, all kinds of true color LCD, touch screen, audio input and output, support high speed large capacity of the SD card, RTC, watchdog, three serial ports, universal USB camera, mouse and keyboard, U disk, support QT.
Wince5.0 driver support: ATA hard disk, camera, CS8900 front-end ports, LCD, DM9000 front-end ports, IIC, keys and leds, serial ports, SDHC CARDS, touch screen, USB, AC97 audio, IIS, etc.
Test program (ADS1.2
Platform: |
Size: 29696 |
Author: 龙芯 |
Hits:
Description: 在linux系统下，将嵌入式系统镜像文件，写入到存储设备中，以便开发板能顺利通过efi引导进入嵌入式操作系统。-You can write image to a USB key, SATA drive, or SD card using the mkefidisk.sh script.
Platform: |
Size: 3072 |
Author: grf |
Hits: