Location:
Search - u-boot1.1.4
Search list
Description: U-Boot1.1.2是最为常用的嵌入式系统Bootloader，这个版本是目前的最新版本-U-Boot1.1.2 is the most commonly used in embedded system Bootloader, this version is the latest version
Platform: |
Size: 9365309 |
Author: lovekk |
Hits:
Description: u盘，mp3下的文件系统，完全兼容fat16，fat32，加上自己的硬盘驱动接口后应该可以使用-u disk, mp3 under the file system, fully compatible with fat16, fat32, coupled with their own hard disk drive interface should be able to use
Platform: |
Size: 280576 |
Author: |
Hits:
Description: 嵌入式系统中最流行的bootloader源代码 ,uboot的版本可以说非常之多，这一个是2005年最新的。提供在这里省去大家自己到处寻找的烦恼。
因为上载限制后缀名，请大家去掉rar,因为bz2就是压缩文件。-embedded systems of the most popular Bootloader source code, uboot version may be said many times, this is an up-to-date in 2005. For here we saved themselves the trouble of having to look around. Because of restrictions on the extension you, please remove rar, bz2 is compressed files.
Platform: |
Size: 5766144 |
Author: 贺亚龙 |
Hits:
Description: 最新版的嵌入式bootloader源代码，可以轻松的在一周之内一直到各类MCU上，如MIPS，ARM7，ARM9，XScale，Power PC等平台。-latest version of the embedded Bootloader source code, can easily within a week and have all kinds of MCU, such as MIPS, ARM7, ARM9, XScale, Power PC platform.
Platform: |
Size: 5945344 |
Author: 古月伦 |
Hits:
Description:
Platform: |
Size: 5602304 |
Author: 何立 |
Hits:
Description: u-boot-1.4.4的源代码
适合嵌入式开发的朋友。
因为后缀名不支持bz2，我在后面加上了gz。下载后重命名为bz2的后缀即可-u-boot-1.4.4 source code for embedded development friends. Because the suffix does not support bz2, I insert a gz. After downloading named for the suffix can bz2
Platform: |
Size: 5945344 |
Author: 孙凯 |
Hits:
Description: 自己修改的U-boot1.1.4For AT91RM9200DK.
请用armgcc3.3.2编译。-its own amended U-boot1.1.4For AT91RM9200DK. Please ar mgcc3.3.2 compiler.
Platform: |
Size: 8881152 |
Author: www |
Hits:
Description: 做嵌入式开发的，bootloader一般用u-boot 。不会用？？ 那就看看这篇文章吧！~强烈推荐做嵌入式开发的看看！~-so embedded development, Bootloader general use u-boot. Not? ? Then read this article! ~ Strongly recommended the development of the Embedded done! ~
Platform: |
Size: 347136 |
Author: hehe |
Hits:
Description: 调试通过的可以直接在NAND Flash 上启动的u-boot-1.1.6 (开发板：优龙st2410) 包括：cs8900网卡驱动，NAND Flash 烧写，NAND 环境变量保存（saveenv）, bootm, go, 网络下载tftpboot-debugging can be passed directly on the NAND Flash to initiate the u-boot-1.1.6 ( Plate : You Lung st2410) : cs8900 card driven, NAND Flash burning, NAND preserve the environment variables (saveenv), bootm, go, Download tftpboot network
Platform: |
Size: 9320448 |
Author: |
Hits:
Description: (原创)uboot在yl2410上的移植，此u-boot代码在sdram、norflash或nandflash上都可启动运行，附详细说明文档-(Original) uboot in yl2410 the transplant, the u-boot code in the sdram, norflash or the NANDFLASH can start running on the attached detailed description of the document
Platform: |
Size: 6199296 |
Author: 阿里 |
Hits:
Description: 华为 HI3510 BOOTLOADER HIBOOT 源码包-Huawei HI3510 BOOTLOADER HIBOOT source packages
Platform: |
Size: 9921536 |
Author: |
Hits:
Description: 关于2410开发板的u-boot的说明，版本是1.20的，个人觉得不错，很有借鉴意义-On the 2410 development board of the u-boot that version is 1.20, and personally feel that good, useful reference
Platform: |
Size: 283648 |
Author: qld001a |
Hits:
Description: 这是uboot1.1.5的一个补丁，打上这个补丁可以使uboot支持at91sam9260的开发板。
在EBD9260-p开发板上移植u-boot1.1.5可以从ATMEL的一块demo板（at91sam9260ek）的uboot文件里修改而得。其实1.1.5的uboot并不支持ATMEL的at91sam9260ek，只支持at91rm9200ek，通过ATMEL官方提供的u-boot-1.1.5_atmel_1.4.diff.bz2补丁可以使1.1.5的uboot支持at91sam9260ek，其实里面具体的工作也是将9200目录里的文件复制后修改成at91sam9260ek的。
-This is a uboot1.1.5 patch, marked with this patch can make uboot support at91sam9260 development board. EBD9260-p in the development of transplant board u-boot1.1.5 from ATMEL a demo board (at91sam9260ek) to amend the document derived from uboot. 1.1.5 In fact, uboot does not support the ATMEL
Platform: |
Size: 118784 |
Author: qianyou |
Hits:
Description: s3c-u-boot-1.1.6_rel-4-3-2_20080917.tar.bz2
S3C6410X的U-BOOT源代码 20080917-s3c-u-boot-1.1.6_rel-4-3-2_20080917.tar.bz2S3C6410X the U-BOOT source code 20080917
Platform: |
Size: 7199744 |
Author: softchip |
Hits:
Description: 将U-boot1.1.4移植到了MagicARM2200平台。Nor_Flash_SST39VF1601检测正常。网络芯片DM9000E工作正常。没有能够实现Nand_Flash的驱动。-U-boot1.1.4 will be transplanted to the MagicARM2200 platform. Detection Nor_Flash_SST39VF1601 normal. Network chip DM9000E normal work. Nand_Flash not been able to achieve the drive.
Platform: |
Size: 130048 |
Author: JunLee |
Hits:
Description: TQ2440 uboot1.1.6的移植文档
自己写的 增加了DM9000网卡驱动 和NAND Flash的读写 并支持NAND方式启动-TQ2440 uboot1.1.6 portable document written by an increase of their DM9000 network driver and NAND Flash read and write and to support NAND boot mode
Platform: |
Size: 262144 |
Author: TANG |
Hits:
Description: 移植成功的u-boot1.2.0源码，支持TX2440开发板或者2K大页面nandflash，DM9000a网卡的其他厂家的2440开发板。可设置环境变量以nandflash、网络（tftp以及nfs都可）引导内核，适合初学者进行代码分析或者作为上层开发人员的内核引导工具。
备注：本源码在ubuntu10.04系统下，采用arm-linux-softfloat-gnu-gcc2.4.5编译器编译成功，并在TX2440开发板上完美运行。-Successful transplantation of u-boot1.2.0 source development board, or 2K support TX2440 large page nandflash, DM9000a 2440 network card manufacturers and other development board. Can set the environment variable to nandflash, network (tftp and nfs can) booting the kernel, the code analysis for beginners or as a top developer of the kernel boot tools. Note: The source in the ubuntu10.04 system, using arm-linux-softfloat-gnu-gcc2.4.5 compiler to compile successfully, and the TX2440 development board perfectly.
Platform: |
Size: 3113984 |
Author: jiangyu |
Hits:
Description: AT91RM9200的u-boot1.3.4 guaide-The u-boot1.3.4 guaide AT91RM9200
Platform: |
Size: 329728 |
Author: zhangli |
Hits:
Description: linux u-boot1.3.4-2的源代码-linux u-boot1.3.4-2 source code
Platform: |
Size: 12544000 |
Author: haoyaogang222 |
Hits:
Description: u-boot1.1.6在S3C2440平台上的移植说明，很详细。-Description the u-boot1.1.6 transplant S3C2440 platform very detailed.
Platform: |
Size: 114688 |
Author: 吴翔 |
Hits: