Description: NEC Infrared format decoding method of the high tc9012 1,9 Ms head start, followed by the low 4.5Ms, if there is high when 2.25Ms, is a continuous signal, do not deal with 2, and then to a high-power low for a peaceful 1Bit, high time 0.5625Ms = 562us, high-low ratio of 1:1 when the time is Bit1, when the ratio of 1:3 is Bit0 3, Timer1 interrupt the implementation of 100us sampling period, 9Ms = 90,4.5 Ms = 45, high = 5, low-level up to 15 4, were read into 4Byte were 24bit, the first is the 1,2 Byte code and its anti-CustomCode code, the first is the 3,4 Byte Code DataCode and its anti-5 , CustomCode correct and well-tested DataCode correct, the implementation of 6, the infrared receiver is the output of the RP
- [tc9012] - Good understanding of the infrared C51 d
- [ir_read] - IR decoding procedures, the interrupt le
- [TC9012irda] - 51 TC9012-based remote control program,
- [Cyuyan] - " Advanced Embedded C language"
- [Visual_C_6Sduty_Sample1] - This is the VC on the study of programmi
- [TC9012C] - TC9012 remote control receiver board dec
File list (Check if you may need any files):
1.c
1.cof
1.dbg
1.hex
1.lis
1.lk
1.lst
1.mak
1.mp
1.o
1.prj
1.SRC
1._c
Download